What kind of engine does a Mitsubishi Eclipse have?
Based on the Mitsubishi Galant platform, the car came equipped with a choice of four gasoline engines comprised of two 4-cylinder 2.4 L units and two 3.0 L V6 plants. The first half delivered outputs of 140 hp and 170 hp while the second produced 200 hp and 210 hp respectively.
When did the Mitsubishi Eclipse third generation come out?
The Eclipse underwent a change into its third generation in 1999, closely applying the Mitsubishi SST design study which debuted at the 1998 North American International Auto Show. It was the first concept vehicle exhibited by Mitsubishi at an auto show in the U.S.
What are the trim levels of the Mitsubishi Eclipse?
For the 2010 model year in the U.S., its primary market, the Eclipse was available in five trim levels: GS, GS Sport Spyder, SE, GT, and GT Spyder. In Mexico, the GT Spyder is known as the Eclipse Convertible. In Canada, the GT trim is known as the GT-P.
Who are the manufacturers of the Mitsubishi Eclipse?
The first two generations (1G and 2G) share the automobile platform and parts with the rebadged Eagle Talon and Plymouth Laser captive imports. They were built during Mitsubishi Motors ‘ close relationship with Chrysler Corporation.
What is the Mitsubishi Eclipse service manual 2000-2002?
2000-2002 Eclipse Service Manual – Tearstone Skip to content Tearstone Mitsubishi Eclipse Performance Specialist Menu Factory Service Manuals 2000-2002 Eclipse Service Manual 2003-2005 Eclipse Factory Service Manual 2006 Eclipse Factory Service Manual 2006 Mitsubishi Eclipse Technical Information Manual Performance Tech Technical Installations
Where is the transmission on a Toyota eclipse?
If you look under the hood on the driver’s side, you will see the transmission. There is a bolt there, take a 17mm socket and take that bolt out. If fluid comes out then you have plenty, if not you will need to add fluid until it starts coming out. ***Note: The manual transmission take gear oil (SAE 75W-90, API Services GL-4).
What are the groups in the Eclipse service manual?
Group 54A – Chassis Electrical Group 54B – Simple Wiring System (SWS) Group 55 – Heating and Air Conditioning Group 70 – Component Locations Group 80A – Configuration Diagrams Group 80B – Splice Locations Group 90 – Circuit Diagrams Index 64 thoughts on “2000-2002 Eclipse Service Manual” mike lehrsays: May 21, 2013 at 5:34 am
This depends not only on the make and model, but also the engine size. Models of the Mitsubishi Eclipse made from 1995 to 1999 offer choices of 2.0 L or 2.4 L engines and models built from 2000 to 2005 can have a 2.4 L or 3.0 L engine. Models manufactured after 2005 can be equipped with a 2.4 L or 3.8 L engine.
How to replace a fuel pump in a Mitsubishi Eclipse?
Install the new fuel pump into the fuel tank using the items included in the kit. Tighten the locking ring over the fuel pump if your vehicle has all wheel drive. Close the inspection cover and connect the fuel hose and electrical harness. Replace the rear seat and negative battery cable.
When did the Mitsubishi Eclipse hit the market?
Click through to follow the Eclipse’s evolution. The Mitsubishi Eclipse burst onto the scene in 1989 as a ’90 model, during a peak period for compact sports coupes. Built at the Mitsubishi/Chrysler plant in Normal, Illinois, this Mitsubishi was sold also by Chrysler dealers (as was the custom).
When was the Mitsubishi Eclipse Spyder GTS built?
This 2003 Eclipse Spyder GTS is a bit of an enigma. While Mitsubishi confirms it was built by wheel purveyor R1 Racing Sports for the 2003 SEMA show, very little documentation exists.
Based on the Mitsubishi Galant platform, the car came equipped with a choice of four gasoline engines comprised of two 4-cylinder 2.4 L units and two 3.0 L V6 plants. The first half delivered outputs of 140 hp and 170 hp while the second produced 200 hp and 210 hp respectively. The new e…
When did the Mitsubishi Eclipse GS Sport tr come out?
Mitsubishi also fielded a new GS Sport tr… The Mitsubishi Eclipse debuted back in 1990 as a sport coupe offered with powerful engines and even an all-wheel-drive system. Reaching its fourth generation in 2005, the new Eclipse came with a redesigned sportier look and a choice of only two engines.
How did the Mitsubishi Eclipse get its name?
The Eclipse stands for the alchemical process through which a horse is made into a car. All jokes aside, it was named after an English racehorse which won a record 26 races during the 18th century. Naturally, the car was styled as a coupe and fitted with a variety of powerful engines to better express its revvy nature.
When did the Mitsubishi Eclipse get a facelift?
The facelift was introduced at the 2008 Chicago Auto Show and consisted of minor aesthetic retouches to the car’s front and rear fascia. The GT trim introduced a larger rear spoiler, high intensity discharge (HID) head lamps and Active Stability Control (ASC). Mitsubishi also fielded a new GS Sport tr…
What kind of bolt head does a Mitsubishi 2.4L use?
Type: Bolt Head: Hexagon 29.83 Type: Bolt Head: Hexagon 32.54 4G64 – Lower – Below Starter – Theads in Transaxle Type: Bolt Head: Hexagon 47.45 Type: Bolt 48.81
How big is the transaxle in a Mitsubishi 2.4L?
4G64 – Inspection Cover Bolts – To Engine Type: Bolt 25.76 4G64 – Inspection Cover Bolts – To Transaxle Type: Bolt 29.83 Type: Bolt Dim: M 10 X 1.50 29.83 4G64 – Intake Manifold Stay (10mm) Type: Bolt Dim: M 10 X 1.50 17.63 4G64 – Intake Manifold Stay (8mm) Type: Bolt Dim: M 8 X 1.25
How big is the cap on a Mitsubishi 2.4L?
Dim: M 8 X 1.25 Camshaft Position Sensor To Cylinder Head 6.5 8.81 4G64 – Camshaft Position Sensor Type: Bolt 14.5 19.66 4G64 – Rod Cap Nuts – 2 Steps: 14.5; +90deg
How does the torque converter clutch work on a Mitsubishi?
To minimize fuel consumption, the torque converter clutch is applied by the TCM/PCM, depending on throttle position and vehicle speed. This unit operates very much like the Chrysler 41TE transaxle. These units are currently found in several Mitsubishi models as shown in Figure 1, Dodge Stratus, some Hyundai models and some Kia models. DALE ENGLAND
What are the bearing cap bolts on a Mitsubishi 2.4L?
18.98 4G64 – Main Bearing Cap Bolts – 2 Steps: 14; +90deg Type: Bolt 24.4 4G64 – Main Bearing Cap Bolts – 2 Steps: 18; +90deg Type: Bolt Crankshaft Position Sensor To Engine Block 6.5 8.81 4G64 – Crankshaft Position Sensor Retaining Bolt Type: Bolt
Dim: M 8 X 1.25 Camshaft Position Sensor To Cylinder Head 6.5 8.81 4G64 – Camshaft Position Sensor Type: Bolt 14.5 19.66 4G64 – Rod Cap Nuts – 2 Steps: 14.5; +90deg
4G64 – Inspection Cover Bolts – To Engine Type: Bolt 25.76 4G64 – Inspection Cover Bolts – To Transaxle Type: Bolt 29.83 Type: Bolt Dim: M 10 X 1.50 29.83 4G64 – Intake Manifold Stay (10mm) Type: Bolt Dim: M 10 X 1.50 17.63 4G64 – Intake Manifold Stay (8mm) Type: Bolt Dim: M 8 X 1.25
It is arguably one of the nicest looking cars to come out from Mitsubishi. There were only a few engine choices initially ranging from a 1.8 to a stunning turbocharged 2.0 engine making just under 200bhp. In 1995 the model range was revised and you could choose between a 2.0 and 2.4l engine with a turbocharged 2.0 which had power hiked to 210bhp.
Is it necessary to tune a Mitsubishi Eclipse?
Turbo engines respond really well to tuning, and there are plenty of upgrade parts around for them. Getting the right mods for your planned usage of the car is vital. Stage 3 (competition) mods just don’t work well on the road.
When did the Mitsubishi Eclipse Convertible come out?
A convertible body style was added during the 1996 model year. The first two generations (1G and 2G) share the automobile platform and parts with the rebadged Eagle Talon and Plymouth Laser captive imports. They were built during Mitsubishi Motors ‘ close relationship with Chrysler Corporation.
Are there any performance parts for the Mitsubishi Eclipse?
Due to the tuner friendliness as well as the current market prices for the Mitsubishi Eclipse many performance parts such as turbo upgrades, exhaust systems, down pipes, intercoolers, air intake systems, radiators and more are readily available at affordable prices.
What was the compression ratio of the Mitsubishi Eclipse?
The 1995–1999 turbo engines were given an increased compression ratio of 8.5:1, up from 7.8:1, and a smaller turbo, a Garrett T25 set to 12 psi in place of the previous Mitsubishi TD04-13G (automatic cars) and TD05-14B (manual cars). This was done to minimize turbo lag, which was an undesirable trait for mass-market appeal in the U.S.
When was the second generation Mitsubishi Eclipse made?
The Eclipse was revised for the 1995 model year as the second generation. The Eclipse was available in five trim levels during its first-generation production run. AWD models were not available until halfway through the first model year.
Which is the best down pipe for a Mitsubishi Eclipse?
Featured brands include Megan Racing, Tanabe, Godspeed Project, Magnaflow, Invidia, Injen and more. For turbocharged models the down pipe is a must have modification for any Eclipse. These Mitsubishi Eclipse down pipes offer straight through design for optimal performance.
With the Eagle Talon gone, Eclipse carried on alone. Changes for ’99 included white-faced gauges on GSX and GS-T models and standard and optional equipment shuffles. A redesigned Eclipse appeared for 2000. All Eclipse coupes held a 2.0-liter 4-cylinder engine with dual overhead camshafts.
What was the wheelbase of the Mitsubishi Eclipse in 1995?
Still mechanically similar to the Eagle Talon, the redesigned 1995 Eclipse got dual airbags, more-rounded styling, a larger interior, and a new base engine. Although the coupe’s wheelbase grew by 1.6 inches, it measured slightly shorter overall. Eclipse came in four models.
The 1995–1999 turbo engines were given an increased compression ratio of 8.5:1, up from 7.8:1, and a smaller turbo, a Garrett T25 set to 12 psi in place of the previous Mitsubishi TD04-13G (automatic cars) and TD05-14B (manual cars). This was done to minimize turbo lag, which was an undesirable trait for mass-market appeal in the U.S.
This Mitsubishi Eclipse boasts a Gas I4 2.4L/ CID engine powering it’s sleek transmission.
Is there financing for a 1995 Mitsubishi Eclipse?
ENGINE NOISE. NO FINANCING AVAILABLE FOR THIS CAR. AS-IS. ENGINE NOISE. NO FINANCING AVAILABLE FOR THIS CAR. AS-IS. ENGINE NOISE. NO FINANCING AVAILABLE FOR THIS CAR. AS-IS. ENGINE NOISE. NO FINANCING AVAILABLE FOR THIS CAR.AS-IS. ENGINE NOISE. NO FINANCING AVAILABLE FOR THIS CAR.AS-IS. ENGINE NOISE. NO FINANCING AVAILABLE FOR THIS CAR.AS-IS.
What kind of seats does a Mitsubishi Eclipse have?
Description: Used 2003 Mitsubishi Eclipse GS with Rear Bench Seats, Fold Flat Rear Seats, 2nd Row Bucket Seats. All prices and offers are before tax, tag, title, license and administrative fee.
Based on the Mitsubishi Galant platform, the car came equipped with a choice of four gasoline engines comprised of two 4-cylinder 2.4 L units and two 3.0 L V6 plants. The first half delivered outputs of 140 hp and 170 hp while the second produced 200 hp and 210 hp respectively.
The Eclipse underwent a change into its third generation in 1999, closely applying the Mitsubishi SST design study which debuted at the 1998 North American International Auto Show. It was the first concept vehicle exhibited by Mitsubishi at an auto show in the U.S.
For the 2010 model year in the U.S., its primary market, the Eclipse was available in five trim levels: GS, GS Sport Spyder, SE, GT, and GT Spyder. In Mexico, the GT Spyder is known as the Eclipse Convertible. In Canada, the GT trim is known as the GT-P.
Eclipse, Talon, Laser, 4G37, FWD, Non MCA Jet head, 8 Valve, with Balance shaft. Not for Colt. see 229A Mirage, 4G93, FWD, SOHC, 16 Valve. Intake on Right Side of head. Adjustable roller Rockers, crank Angle Sensor on Oil Pump Mirage, 4G3, FWD, SOHC, 16 Valve Intake on Right Side of head. Hydraulic roller Rockers, crank Angle Sensor on Oil Pump
How many remanufactured engines does a Mitsubishi have?
Remanufactured engine pricing and I.D. for cars, inboard boats, trucks, RV’s or motor home at links above. 1900 different remanufactured engines with a fill of 90%. Please see Pricing below for remanufacture of YOUR Mitsubishi Longblock. Mirage, 12-Valve, P.F.I., fwd, non-mca jet head, Sohc, cam and crank sensor. Intake on right side.
What kind of engine does a Mitsubishi Mighty Max have?
Mighty Max Pickup, Montero, RWD, MCA Jet head, 12 1/4″ Across Bellhousing Bolts, 79mm crank Sprocket, Carb. 5/84-5/86 Stick or Auto. Also 5/86-4/87 Standard Trans Mighty Max Pickup, Rwd, Auto. Trans, Hydraulic Lifter, Wide block, 13 1/4″ Across Lower Bellhousing Bolts. Big oil pump
Eclipse GS DOHC AWD: Equipped with a 150 hp (112 kW) 4G63 16-valve naturally aspirated engine (AWD N/A only available in Europe) All were only available with 5-speed manual transmission and without rear limited-slip differential. Sunroof, cruise control, ABS, central locking, and A/C were included.
Where is the low side high side low pressure switch?
The switch is located near the expansion valve. Use an Ohmmeter to find if it is giving the correct reading. Also, check if the compressor clutch engages and rotates the compressor when the AC is on. Similarly, the fan also has to spin when you turn the system on.
Are there any recalls on the Mitsubishi Eclipse?
In March 1998, Mitsubishi issued a recall (bulletin 98V069001) for all 1990-1998 Mitsubishi Eclipse GSXs citing, “Lockup of the transfer case can occur due to insufficient lubrication. The condition can cause a loss of vehicle control increasing the risk of a crash.”
What are the features of a Mitsubishi Eclipse?
The front side airbags and antilock brakes were only available to the GT, part of a Premium Package option that also included leather upholstery. Standard features included alloy wheels, air conditioning, CD stereo, and power windows and locks. The RS had 15-inch wheels, the GS 16-inch, and the GT 17-inch tires.
Do you need replacement parts for Mitsubishi Eclipse?
Your Mitsubishi Eclipse will never fail to impress with its powerful engine, comfortable interior, and sleek styling. However, like any other vehicle, it’s still susceptible to wear and tear. Some of its parts may need replacement as it racks up mileage.
What kind of engine does a Mitsubishi Eclipse Spyder have?
Description: Used 2007 Mitsubishi Eclipse Spyder GS with Soft Top, Rear Bench Seats, Audio and cruise controls on steering wheel, 2nd Row Bucket Seats. Look at this 2007 Mitsubishi Eclipse GT. Its Manual transmission and Gas V6 3.8L/234 engine will keep you going.
Where can I buy a 2004 Mitsubishi Eclipse GS Spyder?
Clean CARFAX. 2004 Mitsubishi Eclipse GS Spyder FWD 4-Speed Automatic with Overdrive 2.4L I4 SMPI SOHC 16VBUY FROM AN AWARD WINNING DEALER At Leith Toyota, our goal is to ensure that all of our customers are completely satisfied. Our team consists of true professionals who are dedicated to our customers.
How many horsepower does a Mitsubishi Eclipse have?
This was for the purpose of offsetting the additional weight of the AWD mechanism (approximately 2,930 lbs Vs 2,570 lbs GVW). However, 1991 and later years of both turbo models standardized on the 195 hp version 4G63T. The automatic models were rated at 180 hp (130 kW) due to smaller fuel-injectors and turbocharger.
The first two generations (1G and 2G) share the automobile platform and parts with the rebadged Eagle Talon and Plymouth Laser captive imports. They were built during Mitsubishi Motors ‘ close relationship with Chrysler Corporation.
The basic driveline layout of the Eclipse is a transverse-mounted 4-cylinder Chrysler 420A, Mitsubishi 4G64 or 4G63 engine. The Mitsubishi motors are mounted in the same orientation as the first generation cars. The 420a-powered cars had the engine mounted on the right side of the car, and further back in the chassis.
Are Mitsubishi Eclipses fast?
1800hp Mitsubishi Eclipse is the fastest stick shift street car in the world.