What kind of coolant does a 2009 Jeep Wrangler take?
Zerex 1 Gallon Yellow 50/50 Coolant/Antifreeze.
How much antifreeze does a 2009 Jeep Wrangler take?
Although the cooling system capacity is just a touch over three gallons, only one to 1.5 gallons (including expansion tank coolant) can be drained from the cooling system. To remove the rest of the old coolant, several flushing cycles will be needed.
What kind of antifreeze does a 2010 Jeep Wrangler take?
Prestone 50/50 Coolant/Antifreeze.
What color coolant does a 2008 Jeep Wrangler take?
Antifreeze/Coolant Prestone 1 Gallon Orange 50/50 Coolant/Antifreeze.
What kind of coolant should I use on my Jeep Wrangler?
You are best off, to just purchase from your Jeep Dealer. Be noticed my coolant/antifreeze level is way below the minimum line. It calls for MOPAR antifreeze. Can I use a different type? If so what type should I use (from advance auto parts) and what should I mix with?and does it matter if the color isn’t orange?
How does the cooling system work on a Jeep Wrangler?
A cooling system is comprised of six main parts: Your coolant is designed to absorb heat from the engine block. Coolant is pushed through the engine block via the water pump and then through a series of fins and tubes inside the radiator that allow the heat to dissipate.
Can you mix Mopar coolant with other coolant?
CAUTION: Mopar® Antifreeze/Coolant, 5 Year/100,000 Mile Formula (MS-9769) may not be mixed with any other type of antifreeze. Mixing of coolants other than specified (non-HOAT or other HOAT), may result in engine damage that may not be covered under the new vehicle warranty, and decreased corrosion protection.
Where can I get antifreeze for my Jeep Wrangler?
The Autozone folks at the Rio Grande, NJ store helped me find the proper antifreeze for my Jeep Wrangler, and they even had supplies that I could borrow in order for me to add the coolant to my Jeep, during my visit. I found this product listed for the vehicle I purchased but lacked an owner’s manual.
You are best off, to just purchase from your Jeep Dealer. Be noticed my coolant/antifreeze level is way below the minimum line. It calls for MOPAR antifreeze. Can I use a different type? If so what type should I use (from advance auto parts) and what should I mix with?and does it matter if the color isn’t orange?
The Autozone folks at the Rio Grande, NJ store helped me find the proper antifreeze for my Jeep Wrangler, and they even had supplies that I could borrow in order for me to add the coolant to my Jeep, during my visit. I found this product listed for the vehicle I purchased but lacked an owner’s manual.
A cooling system is comprised of six main parts: Your coolant is designed to absorb heat from the engine block. Coolant is pushed through the engine block via the water pump and then through a series of fins and tubes inside the radiator that allow the heat to dissipate.
How much fluid do you put in a Jeep Wrangler?
For axles with the Trac-lok differential add 3.4 oz. of limited-slip additive. If you like to do you own service on your TJ you will need to know the specifications for fluid changes.