What kind of brakes does a Nissan Altima have?
The Nissan Altima is equipped with disc-type front brakes. The brake functions by using friction created by two brake pads pressing against a circular brake rotor. In most cases, maintaining the front brakes is a simple matter of replacing the pads.
How to tighten front brake pads on Nissan Altima?
Tighten the two caliper bolts using a 14mm socket and ratcheting wrench to just past hand tight. The Nissan Altima service manual specifies that the front caliper bolts should be tightened to 20 ft lb using a torque wrench. Make sure that the caliper bolts are tight enough so that they will not vibrate loose.
When to change the brake pads on a Nissan?
The brake pads on your Nissan will typically work perfectly for about 50,000 miles. However, your driving style may cause a slight or drastic variation. If you have a tendency to stomp on your brakes at every stop light or “ride your brakes” when going downhill, you might have to change out those pads much sooner.
Where is the wear bar on Nissan Altima?
Be sure that the wear indicator or “squeal” bar is installed into the same location and orientation as it was on the old pads. The wear bar was installed at the top of the outer brake pad on this particular Nissan Altima. Then move to the lower caliper pin and gently pull it out of the caliper bracket while holding the rubber boot.
When to replace brake pads on Nissan Altima?
If your vehicle exhibits shuddering, pulsating, or vibrations while braking, you may need to have your rotors “turned” (resurfaced) or just replace them altogether with brand new rotors. Place the new brake pads into the caliper bracket and push them until the friction surface rests flush against the brake rotor.
When do you need to change your brake pads?
You use them every time you come to a stop sign, whenever wildlife decides to jump out in front of your Nissan, or when some jerk decides to cut you off on highway. In order to stop at a moment’s notice and avoid a collision, your brake pads need to be changed out regularly, and we want to share some advice regarding the best time to do so!
Be sure that the wear indicator or “squeal” bar is installed into the same location and orientation as it was on the old pads. The wear bar was installed at the top of the outer brake pad on this particular Nissan Altima. Then move to the lower caliper pin and gently pull it out of the caliper bracket while holding the rubber boot.
When do you need to use the brakes on a Nissan?
Some of the most important components are the brakes. You use them every time you come to a stop sign, whenever wildlife decides to jump out in front of your Nissan, or when some jerk decides to cut you off on highway.