What kind of arm kit does a Honda Accord have?
Front Replacement Control Arm Kit – for 2004 Honda Accord 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated – EX Coupe 2-Door
How much does it cost to replace wheel bearings on a Honda Accord?
Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Honda Accord Wheel Bearings Replacement costs $246 on average.
Is there a problem with my Honda Accord?
I researched online and discovered that Honda had agreed to settle a class action lawsuit for a “defect” with the rear brakes of about 750,000 Honda Accord and Acura TSX vehicles. All 2008, 2009 and a few early 2010 model year Accord vehicles are possibly affected by the problem along with 2009 and some 2010 Acura TSX cars.
Where can I get parts for my Honda Accord?
Regardless of the Honda Accord OEM parts that you are in the market for, such as front brake rotors or door lock actuators, you can peruse our parts catalog at PartsGeek.com to find the Honda parts that you need to repair or even accessorize your Accord. delivery was very quick and I didnt pay extra.
Why is my Honda Accord leaning on its side?
To avoid long term damage to the vehicle, replace the broken springs because they can become entangled with the CV joints or rims. If you notice your Accord leaning to one side without a flat tire, one of the spring coil must be broken.
What kind of suspension system does a Honda Accord have?
This article applies to the Honda Accord (1990-2002). The comfort of your driving depends mostly on the suspension system being in good condition. But as your Honda Accord rakes in more miles, wear and tear in the suspension system is inevitable.
Why does my Honda Accord keep shifting gears?
Honda Accord drivers complained at CarComplaints.com, the car repair statistics site about transmission slipping and jerking while shifting gears. Some even said that the faster they drove the harder Accord shifted. And these symptoms often happen when the Accord reached at about 10,000 miles.
What should I put on my Honda Accord?
Engine Splash Shields by Dorman®. Protect the engine, the engine components and the engine hoses with Dorman’s Undercar Splash Shield. It safeguards against corrosion by preventing salt, water, and snow from splashing up into the engine… Engine Splash Shield by TruParts®.
What was the problem with the Honda Accord in 1995?
1995, 1996, 1997 except DX and V6 models: The wire harness for the factory-installed air conditioner may be improperly routed, allow wires to rub against each other; this poses the risk of a short circuit that could lead to overheating, smoke, and a possible fire.
Where can I buy genuine Honda Accord parts?
The Accord is the best family-friendly sedan on the road and deserves only genuine parts. Buying genuine parts for Accord from us is risk-free as all parts are expedited directly from Honda dealers and covered by the manufacturer’s warranty.
When did the first Honda Accord come out?
Honda Accord, as a series of vehicles, has been produced by the renowned Japanese automobile manufacturer Honda Motor Co., Ltd. since 1976. When the first Honda Accord was released in 1976 to Japanese market, it was a 3-door hatchback to replace the Honda 1300.
What kind of power does a 1994 Honda Accord have?
What Camerons Car Reviews has to say about the 1994 Accord: For 1994 the Accord gets full redesigned boasting more interior space and more luxury features with on top of that superb reliability and resale value. Power comes from a 2.2 L 4-Cylinder made into a standard for 5-Speed Manual or an optional 4-Speed Automatic.
What kind of engine is in a 1999 Honda Accord?
Honda Accord F23A Used Japanese engine for year 1999 Honda Accord for sale. This is a low mileage engine imported from Japan. Honda Accord J30A V6 Used Japanese engine for year 1999 Honda Accord for sale. This is a low mileage engine imported from Japan. Honda Accord J30A1 V6 JDM Japanese used motor for year 1999 Honda Accord for sale.
When to replace the oil pressure switch on a Honda Accord?
In most cases you replace this switch because it’s leaking oil. Not the case on this Accord. I also show how to attach an oil pressure gauge to physically measure engine oil pressure. The oil pressure sender socket in the video is part number KD2569. An equivalent socket can be picked up at most auto parts stores if needed.
How to replace crankshaft pulley and seal on Honda Civic?
This step-by-step article will guide you through the process of replacing the crankshaft’s bolt, pulley and seal from your Honda Civic. Continue reading to learn how to do just that. This article applies to the Honda Civic (1991-2000). The crankshaft pulley bolt is one of the most stubborn bolts on this era of Honda.
How do you unbolt a crank pulley bolt?
Attach a 17mm socket and attempt to unbolt the crank pulley bolt. In order for this to work, you’ll need an impact gun with more than 600 lb/ft of breakaway torque. If you have one handy, try it out. If it doesn’t work, then use a crank bolt removal tool. If the impact gun didn’t work, the next step is to use the crank bolt removal tool.
How do you replace the pulley on a Honda Civic?
Attach a long breaker bar to the “handle” end of the tool. It should be angled downward against the ground as a brace. Next, attach a 17mm socket to a long extension, and attach it to the crank pulley bolt through the center of the tool. Then, using another large breaker bar, crank on the pulley bolt counterclockwise.
What are the dimensions of a 1998 Honda Accord?
Wheelbase (in.): 106.9 Length (in.): 188.8 Height (in.): 56.9 Width (in.): 70.3 Track (in., front/rear): 61.2/60.4 Headroom (in., front/rear): 40.0/37.6 Legroom (in., front/rear): 42.1/37.9 Shoulder Room (in., front/rear): 56.9/56.1 Hiproom (in., front/rear): 54.9/54.1 Cargo Volume (cu.
Attach a 17mm socket and attempt to unbolt the crank pulley bolt. In order for this to work, you’ll need an impact gun with more than 600 lb/ft of breakaway torque. If you have one handy, try it out. If it doesn’t work, then use a crank bolt removal tool. If the impact gun didn’t work, the next step is to use the crank bolt removal tool.
How to replace crankshaft bolt on Honda Civic?
Use a paint can opener tool (Figure 5) if you have it. Slip the hook end of the tool into gap between the seal and the block. Then yank it out. When installing a new seal, make sure it is flush with the block the way the old one was.