What is the p2404 code on a Subaru Outback?
If the sensor sends back an implausible signal, code P2404 will be set. Click to expand… Has anyone dealt with this issue on an Outback before? It sounds like the faulty part is roughly $150, and will take 2hrs of labor to replace.
How does the EVAP system work on a Subaru Outback?
(Same as last time…) The Evaporative Emission System (EVAP) vents fuel vapors from the tank to the intake manifold so the vapors are burned through the engine’s normal combustion process. The EVAP system uses a leak detection pump sensor to monitor the pressure/vacuum in the EVAP system.
How to check leak in Subaru Outback engine?
Using the Subaru Select Monitor, operate the leak check valve assembly pump. For detailed operation procedures, refer to the “Active Test”. See: Powertrain Management\Computers and Control Systems\Testing and Inspection\Scan Tool Testing and Procedures\Engine (H4DO) – Active Test – Operation Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Active Test.
When does a 1996 Subaru Outback clear readiness?
1996 Subaru vehicles – Vehicles will clear readiness at key-off. There is no reprogramming available for this line of vehicles. These vehicles should be scanned for MIL illumination without regard to readiness status
If the sensor sends back an implausible signal, code P2404 will be set. Click to expand… Has anyone dealt with this issue on an Outback before? It sounds like the faulty part is roughly $150, and will take 2hrs of labor to replace.
(Same as last time…) The Evaporative Emission System (EVAP) vents fuel vapors from the tank to the intake manifold so the vapors are burned through the engine’s normal combustion process. The EVAP system uses a leak detection pump sensor to monitor the pressure/vacuum in the EVAP system.
Using the Subaru Select Monitor, operate the leak check valve assembly pump. For detailed operation procedures, refer to the “Active Test”. See: Powertrain Management\\Computers and Control Systems\\Testing and Inspection\\Scan Tool Testing and Procedures\\Engine (H4DO) – Active Test – Operation Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Active Test.
Is there an OBD code for a Subaru imprenza legacy?
95 Imprenza and Legacy models have OBD2 systems and require a scanner,but some basic codes can be retreived using the flashing MIL method. Codes will only clear when the faulty system or circuit has been repaired.