What is the liftgate trim panel on a Honda CRV?
The liftgate trim panel on your 2012 Honda CR-V comprises four different pieces: an upper panel, lower panel and two side panels. There is only one screw to remove during the whole procedure.
How do you remove interior trim on a Honda CRV?
1. Fold up the rear seat. 2. Detach the hooks (A) from the cargo area side trim panel (B) and B-pillar lower trim (C), and pull the rear door sill trim (D) up by hand to detach the clips (E, F). 3. If necessary, pull the rear side outer trim (G) up to detach the clips (H, I), then remove the trim.
How do you remove a side trim panel?
Pull outward on each side trim panel to release the two clips. Release the hooks that secure the side trim panels to the lower trim panel, and remove the panels. Remove the screw from the pull handle in the lower trim panel, using a Phillips screwdriver. Remove the pull handle cup. Support the lower trim panel by hand near the glass.
What is the header panel on a Honda CRV?
A header panel is a support panel to which other front end body components attach. If a header panel is collision damaged it should be replaced so the front end components can be reinstalled… The CR-V by Honda was unveiled back in 1995, with the first model year being 1997. This compact SUV was derived from the Civic.
Where is the liftgate on a 2012 Honda CRV?
The liftgate trim panel on your 2012 Honda CR-V comprises four different pieces: an upper panel, lower panel and two side panels. There is only one screw to remove during the whole procedure. Open the liftgate. Locate the notches in each end up the upper trim panel.
1. Fold up the rear seat. 2. Detach the hooks (A) from the cargo area side trim panel (B) and B-pillar lower trim (C), and pull the rear door sill trim (D) up by hand to detach the clips (E, F). 3. If necessary, pull the rear side outer trim (G) up to detach the clips (H, I), then remove the trim.
Pull outward on each side trim panel to release the two clips. Release the hooks that secure the side trim panels to the lower trim panel, and remove the panels. Remove the screw from the pull handle in the lower trim panel, using a Phillips screwdriver. Remove the pull handle cup. Support the lower trim panel by hand near the glass.
Where are SRS components located on a Honda CRV?
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service. Put on gloves to protect your hands. Use the appropriate tool from the KTC trim tool set to avoid damage when prying components. Take care not to bend or scratch the trim and panels. 1.
How do you remove a rear trim panel on a CRV?
Slide a small, flat-head screwdriver into each notch and gently pry outward to disengage the retaining hooks. Pull the upper trim panel off the liftgate. Pull outward on each side trim panel to release the two clips.
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service. Put on gloves to protect your hands. Use the appropriate tool from the KTC trim tool set to avoid damage when prying components. Take care not to bend or scratch the trim and panels. 1.
The liftgate trim panel on your 2012 Honda CR-V comprises four different pieces: an upper panel, lower panel and two side panels. There is only one screw to remove during the whole procedure.
Slide a small, flat-head screwdriver into each notch and gently pry outward to disengage the retaining hooks. Pull the upper trim panel off the liftgate. Pull outward on each side trim panel to release the two clips.
How to remove plastic panel on rear hatch door?
The garnish or trim on the lower rear lift gate or fifth door was dislodged. I was able to remove it and purchased a few replacement pins. However, I am having a miserable time trying to reinstall it. I can’t keep the pins aligned AND it looks like one needs to slide it up first to catch two metal tabs in the center, just below the latch.