What is the first thing to do when changing a battery or refueling a forklift?
Follow these steps when changing a battery:
- Set the forklift parking brake and shut off the engine.
- Make sure the battery is secure before lifting it.
- Stay clear of the battery when moving it.
Can you refuel fill up a petrol powered forklift truck with the engine running WHY WHY NOT?
Never refuel while the engine is running (the engine has the potential to ignite the fuel) Ensure you are following safe parking procedures. Open flame, smoke and any potential source of ignition are prohibited within 10 meters of any truck being refuelled or recharged.
What causes an LP forklift to not start?
Crank engine, module senses ignition spark is present, sends msg to fuel injection to add fuel. In failure, the module doesn’t send the msg to the FI, so it doesn’t start.
Why does my Nissan Forklift have propane problem?
The propane makes any deficiencies in the ignition show up much quicker and worse than on gasoline. Most fuel related problems lead to the vaporizer (some people call it a regulator). The carb on most propane lifts is nothing more than a throttle butterfly, all fuel metering is controlled by the vaporizer.
How often should the propane filter be changed in a forklift?
At a minimum, propane fuel filters should be changed every 2,000 hours. Changing your forklift’s fuel filter is one of the most important maintenance items for fuel system integrity. If you find that you’re replacing fuel filters often, that’s a good sign you have issues with dirty fuel tanks.
What to do if your forklift cranks over but doesn’t start?
If you do not have voltage at this point check the ignition circuit thru the ignition switch, fuses, and wire harness connections. If you have voltage at the positive post of coil move your test probe to the negative side of the coil. Now crank the engine over. You should see your test light blink on and off as the engine turns over.