What is the 9223 code resistance value in the ignition?

I have a 9223 code Resistance value in the ignition circuit containing componet R12/9 drivers side airbag ignition squib what do I need to do to fix Show More Show Less Ask Your Own Mercedes Question

Why does my car have a 9223 code?

Hi, I apologize for the wait. The 9223 code points to a fault in the driver’s door side air bag or the wiring. More often it is the wiring which is at fault and not the air bag itself.

What is the part number for a CDI ignition?

For the enclosure you can use a small box from Hammond (001100), Conrad Electronics part number 540830-89, although an acrylic homemade box (cassette or cd case) is an alternative. Once the board has been populated and connected you can check if the ignition produces any sparks.

What does the 9223 code on the air bag mean?

The 9223 code points to a fault in the driver’s door side air bag or the wiring. More often it is the wiring which is at fault and not the air bag itself. You will need to remove the driver’s door liner and install a 3 ohm air bag substitution resistor in place of the air bag and erase the fault code.

What are the fault codes on a Yamaha R1?

36 – malfunction of the ignition coil 4 of the cylinder, – is diagnosed by the self-diagnosis line D: 33; 39 – malfunction of the primary injector circuit, – is diagnosed with the self-diagnosis line D: 36.37.38.39; 40 – malfunction of the secondary injector circuit, – is diagnosed by the self-diagnosis line D: 40,41,42,43;

How does the capacitor in a CDI ignition coil work?

Capacitor C1 stores the electrical energy and is charged up via D3. When there is a pulse at the input it triggers the thyristor into conduction, which connects C1 to ground so it can discharge into the ignition coil. That is all there is to it! A single sided PCB has been designed for the circuit (the layout can be downloaded from [1]).

What do you need to know about CDI circuit?

Circuit Description Now let’s learn the CDI circuit operations in detail with the following points: Basically as the name suggest, ignition system in vehicles refers to the process in which the fuel mixture is ignited for initiating the engine and the drive mechanisms.

What should my oven safety valve resistance be?

Typically these will be somewhere between 80 and 175 ohms of resistance for a working igniter. To test the oven safety valve, measure between the two terminals, on the valve and look for continuity. The resistance here is low, but you should be able to detect 1 to 1.5 ohms.

I have a 9223 code Resistance value in the ignition circuit containing componet R12/9 drivers side airbag ignition squib what do I need to do to fix Show More Show Less Ask Your Own Mercedes Question

Hi, I apologize for the wait. The 9223 code points to a fault in the driver’s door side air bag or the wiring. More often it is the wiring which is at fault and not the air bag itself.

How to check a faulty water inlet valve?

Checking the valve for mechanical failure 1 Disconnect the water supply line from the water valve. 2 Place a bucket under the end of the water supply line. 3 Turn on the water to the supply line and check the flow.

Is the SRS side airbag ignition squib too high?

My SRS light was burning and an indie checked and got this reading: “The resistance value in the ignition circuit containing component R12/10 (Front passenger side airbag ignition squib) is too high.” The indie said he didn’t have the tools to go further and advised me to see the dealer.

What is SRS code for 2008 Mercedes SLK 350?

2008 Mercedes slk 350. Srs light is on I had it scanned and it says code 9076 CAN COMMUNICATIONS FAULTY and code 9183the RESISTANCE VALUE in the ignition CIRCUIT CONTAINING COMPONENTS r12/1 driver etr… read more ENES Volvo mechanic 6,206 satisfied customers Srs code shows red. The resistance value in the ignition

Navigation