What is occupant detection system?
Most Occupant Detection Systems measure the weight of the front seat passenger, to determine if the front passenger seat airbag should deploy. The system can determine whether to change the OFF status of an airbag to ON depending on what is on the passenger seat which in turn causes a change in capacitance value.
Where are the fuse panels on a Honda Civic?
Here you will find fuse box diagrams of Honda Civic 2012, 2013, 2014 and 2015, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout).
What do you need to know about occupant detection system?
This job aid helps explain the operation and repair procedures for the ODS (occupant detection system), the OPDS (occupant position detection system), and the SWS (front passenger’s seat weight sensor) system. Use the chart below to locate the information or service procedure that you will be doing.
Where is the SRS occupant detection system located?
Originally a stand-alone system mounted in the seat-back. Part of the front passenger’s seat base or seat frame assembly. This system detects the position of the driver’s seat and reduces airbag deployment force if the seat is adjusted fully forward.
What happens when you reset the ECU on a Honda Civic?
Resetting the ECU will clear the trouble codes and restore the system’s memory so it can “learn” the aftermarket parts. The process is straightforward and does not require the help of a professional mechanic or Honda dealership; however, you will want to follow the instructions carefully and make sure you have completed each step correctly.
This job aid helps explain the operation and repair procedures for the ODS (occupant detection system), the OPDS (occupant position detection system), and the SWS (front passenger’s seat weight sensor) system. Use the chart below to locate the information or service procedure that you will be doing.
Originally a stand-alone system mounted in the seat-back. Part of the front passenger’s seat base or seat frame assembly. This system detects the position of the driver’s seat and reduces airbag deployment force if the seat is adjusted fully forward.
Where is the ICM on a Honda Civic?
Gently pull off the dust shield/inner cover of the distributor housing to access the ICM. Figure 1. Location of three Phillips screws. Figure 2. Phillips screw is located underneath the rotor. Figure 3. The dust shield can be pulled off. Disconnect the black/yellow, white/blue, and yellow/green wires from the ICM.
How do you replace Ignition Control Module on Honda Civic?
Remove two Phillips screws underneath the ICM to replace it. Simply install the new ICM with the same screws. Reattach the wires connecting the ICM to the distributor housing. Reattach the inner cover and rotor. Secure the rotor with the Phillips screw. Reattach and secure the distributor cap.