What is good compression in an outboard?
What Outboard Compression Test Results Mean. Results vary depending on whether the outboard is a Four-Stroke or a Two-Stroke. Good results for Four-Strokes should be 180-210 PSI, and Two-Strokes should be around 110-130 PSI. Here is everything that you need to know about outboard compression tests.
What should the compression be on an outboard?
This source says modern two-stroke outboards should be in the 90 to 105 psi range. However if you watch the end my video below you will see that my 1979 Evinrude 6 Hp cranks easily cold (2 pulls) with 60 psi compression This source says the older two stroke outboards below 25 Hp should be between 75 and 85 psi.
What should the PSI be on a 4 stroke outboard?
Good results for Four-Strokes should be 180-210 PSI, and Two-Strokes should be around 110-130 PSI. Here is everything that you need to know about outboard compression tests.
What should the PSI be on a four stroke compression test?
Good results for Four-Strokes should be 180-210 PSI, and Two-Strokes should be around 110-130 PSI. Here is everything that you need to know about outboard compression tests. How to do them and what the results mean for you! What Is A Compression Test?
What should the compression be on an Evinrude crank?
However if you watch the end my video below you will see that my 1979 Evinrude 6 Hp cranks easily cold ( 2 pulls) with 60 psi compression This source says the older two stroke outboards below 25 Hp should be between 75 and 85 psi. This source seems to confirm with my understanding that 60 psi in older outboards can sometimes be OK.
This source says modern two-stroke outboards should be in the 90 to 105 psi range. However if you watch the end my video below you will see that my 1979 Evinrude 6 Hp cranks easily cold (2 pulls) with 60 psi compression This source says the older two stroke outboards below 25 Hp should be between 75 and 85 psi.
However if you watch the end my video below you will see that my 1979 Evinrude 6 Hp cranks easily cold ( 2 pulls) with 60 psi compression This source says the older two stroke outboards below 25 Hp should be between 75 and 85 psi. This source seems to confirm with my understanding that 60 psi in older outboards can sometimes be OK.
What’s the compression range on a Mercury cylinder?
For instance, a fully functional Mercury 25 Hp cylinder compression value may be significantly different than that of a Johnson 25 Hp. Its also rather hard to find where a manufacturer will say the compression range should be from this psi to that psi.
Good results for Four-Strokes should be 180-210 PSI, and Two-Strokes should be around 110-130 PSI. Here is everything that you need to know about outboard compression tests.