What is a rear axle housing?
The housing of the rear axle is a hollow supporting beam and is the axle of the automobile. The housings are cast of steel or malleable cast iron or are stamped and welded. The tubular casings of the axle shafts are pressed or welded into the housing of the rear axle and form a unit with it.
What is the function of axle housing?
The inner end of the each half shaft connected to the sun gear of the differential and the outer end to the wheel. The rear axle and differential gear are completely encloses in a housing which protecting them from water, dust and injury.
What holds the axle in place?
On an axle using a pressed bearing setup, the axle is held in place by the pressed-on wheel ball bearing and possibly a pressed collar or retaining clip adjacent to the bearing. The bearing assembly usually fits into a flanged cup that bolts to a mating flange on the outer axlehousing.
How long does it take to fit a rear axle?
It would take approximately 30 minutes to replace one axle. If a person actually wanted to repair an axle, if completely broken, then it would have to be welded. Welding an axle will not work, it weakens the steel to much to make it usable again.
What are the different types of rear axles?
Depending upon the methods of supporting the rear axles and mounting the rear wheels, the three types of rear axles are as follows:
- Semi-floating axle.
- Full-floating axle.
- Three quarter floating axle.
What are the types of axles?
Axles are essential components of any vehicle and come in three main types: front, rear, and stub. An axle is a rod or shaft that rotates the wheels and supports the weight of your vehicle. Axles are essential components of any vehicle and come in three main types: front, rear, and stub.
What is the purpose of an axle housing?
Damage to the axle itself can cause the entire assembly to fail, so the housing acts as a protective layer for the spinning axle. Lubrication of the axle is also made possible because of the housing. The axle housing may also contain other components that allow for steering, driving, or load bearing. If an axle housing is intended primarily
How big are Ford 9 in.axle housings?
Axle Housings, Fabricated Ford 9 in. Housings, Chromoly, Natural, 46.000 in. Overall Length, 3.000 in. Axle Tube Diameter, Ford 9 in., Each Allstar Performance housing kit fits the 1978-88 GM intermediate chassis. Replace a stock GM 7.5 in rear-end w
How are axle housings compatible with Torq axles?
This process ensures the bolt holes match the 3rd member, the face plate is perfectly flat after welding, and the depth of the 3rd member and centerline of the carrier are perfectly aligned with the axle tubes. Our housings are compatible with all models of Torq 3rd members.
Which is better front or rear axle housing?
The front and rear axle housing protects your axle, it’s bushings and all of its most delicate parts so you can keep moving forward through even the roughest conditions without slowing down. Upgrading or replacing your housing is potentially the best way to keep your axle in one piece.