What is a oil return line?
The oil return hose returns the oil directly back to the oil pan, after it passes through the turbocharger. These hoses are crucial in keeping your vehicle operating properly. Common symptoms of a failing oil return hose include cracks or bulges on the hoses and visible oil leaking from the car.
Can you use heater hose for oil return?
Nope. And to the guy that did use it listen up! Heater hose line is designed for coolant and as such does not get along well with oil. Over time the hose will expand and also harden and become brittle.
Can you use silicone hose for oil?
Well standard silicone hoses are porous and therefore not suitable for oil or fuel. There are flurosilicone liners, which are specially formulated to prevent oil from penetrating the wall but we would not recommend these for Fuel lines, or heavy use of Fuel Filling.
Is Gates heater hose oil resistant?
Good resistance to high temperatures. Good resistance to non-oil based coolant additives. Moderate resistance to oil and grease contamination. Similar to SAE 20R3 Class D-2.
How do I know if my turbo is passing oil?
A smoking exhaust – If the turbo housing has cracked, or the internal seals have blown, oil will start to leak into your exhaust system. As this burns off, it produces a distinctive blue/grey smoke, which will probably become more apparent as the engine revs increase just following an idle situation.
Can you over oil a turbo?
If there is too much oil in the pan or if the turbocharger in your car is relatively lower, then oil can get through the seals and begin to blow out. This happens because the restrictor will starve the turbo of oil, which will cause all of the internals of the turbo (including all of the seals) to wear out.
How big should the oil return line be for a turbocharger?
It is best that the turbocharger is mounted as high as possible so the oil will gravity returns back to the engine. If returning the oil back to the oil pan the oil return line fitting must be installed above the oil level in the oil pan. 2. The minimum recommended oil return line size is -10AN or 5/8 inch inside diameter.
Which is the best way to install a turbocharger?
The oil return is crucial to a proper turbocharger installation. 1. It is best that the turbocharger is mounted as high as possible so the oil will gravity returns back to the engine. If returning the oil back to the oil pan the oil return line fitting must be installed above the oil level in the oil pan.
Why is the oil coming out of my turbocharger?
If a turbocharger is leaking oil or smoking this is typically caused by another issue. If we have gone over a customer’s installation in great detail and the turbocharger continues to leak oil and smoke then and only then would we suggest an oil feed line restrictor.
How many turbo oil refills are left in stock?
Only 19 left in stock – order soon. . Only 4 left in stock (more on the way). . Only 7 left in stock – order soon. . . Only 9 left in stock – order soon. . Only 9 left in stock (more on the way). . Only 8 left in stock (more on the way).