What happens when you turn off a mechanical relay?
If a mechanical relay turns on or off near the peak voltage when supplying AC, there is a sudden drop or rise in current. If you have an inductive load such as an electric motor, this can cause a large transient voltage spike when you turn off the relay, as the magnetic field surrounding the inductive load collapses.
Are there two relays for the slideroom motor?
Missing a circuit to supply power to slideroom motor.The drawing pictures one relay to power the in and out voltage to the motor- there are 2 power relays.
How big of a wrench do you need to move a slide?
If you disengage that lock switch you should be able to put a 3/4 inch wrench/ratchet on the nut to move the slide. If there are two motors on the slide it will require two people and the wrenches need to be turne simultaneously (slide ends within 1 to 2 inches of each other) so do the wrench turns together.
How do you raise a drop link screw?
The problem is you need to be able to get hold of and stop the screw from turning. Bend the link arm back from the top out of the way, it’s not very strong at all, you can bend it with your fingers. You can also raise the drop link arm by putting a bar in and levering it up a bit from the bottom triangular widhbone arm.
What kind of wrench is drop forged steel?
Sears Pipe Wrench, adjustable monkey wrench marked 14, Drop Forged Steel, Japan. Industrial machinery tool. Minor rust in working order Vintage Tools .set of 3.
If you disengage that lock switch you should be able to put a 3/4 inch wrench/ratchet on the nut to move the slide. If there are two motors on the slide it will require two people and the wrenches need to be turne simultaneously (slide ends within 1 to 2 inches of each other) so do the wrench turns together.
Missing a circuit to supply power to slideroom motor.The drawing pictures one relay to power the in and out voltage to the motor- there are 2 power relays.
What’s the next step in building a relay?
The next step in building or relay, is to mount the coil assembly to a frame, and then add something that moves, for without something that moves, we can never have a relay. We will use another piece of steel or iron for the coil to attract, we’ll call this piece an armature .