What happens when control arm bushings fail?
When bushings wear, they allow more movement. The driver may feel a shimmy from the front of the vehicle, or hear clunking or rattling noises on rough roads, when turning the wheel or in hard braking. Worn control-arm bushings can allow the vehicle’s front end to slip out of alignment and cause premature tire wear.
What causes control arm bushings to go bad?
Sometimes the wear and tear driving can cause bushings to become loose. Other times, it could be a mechanic who forgot to tightly fasten the bushing back onto the control arm. In any event, the bushing will get damaged if it keeps knocking into those components.
Which condition would be the most likely indication of a worn control arm bushing?
There are many signs of a failing ball joint or control arm bushings including: Clicking, popping, or snapping sound when the wheel is turned. Eventually, the clicking and popping can turn into a squeaking sound at the end of a stop, when the gas pedal is used, and/or when turning the steering wheel.
How to tell if your lower control arm bushing is bad?
Check the bushings visually for visible damage such as tears or hollowing of the rubber. Make sure the ball joints are inspected as the bushing replacement is done, as some of the symptoms can also indicate a failing ball joint. This can be disastrous as the front wheel can completely detach if the ball joint breaks while driving.
Can a bad control arm cause steering wandering?
Another symptom commonly associated with bad or failing control arm assembly is steering wandering. Excessively worn ball joints or bushings can cause the vehicle’s steering alignment to shift, which may cause the steering to pull to the left or right when traveling down the road.
Why are the ball joints on my control arm worn out?
They are equipped with bushings and ball joints that allow it to flex and move according to road conditions and steering input from the driver. Over time, the bushings or ball joints on the control arm can wear out and cause all sorts of problems.
What are the symptoms of a bad control arm?
Here are the most common symptoms of bad control arm bushings and ball joints: Specifically coming from the control arm and usually following a bump, braking, or a hard turn. Pulling to the left or right without input from the steering wheel.