What does the tool light mean on a Honda CR-V?
When your Honda CR-V requires service, a “wrench” icon indicating the Maintenance Minder will appear, and your car should be taken to the dealer for service as soon as possible. Below the percentage indicating remaining oil life, icons indicating other maintenance service items may also appear.
How do you open the dashboard on a Honda CR-V?
Driver’s Dashboard Under Cover Removal/Installation20-89
- Remove the driver’s dashboard under cover (A). Turn the lock knob (B) 90°. Gently pull down the rear edge to release the clip. Pull the cover away to release it from the clip (C).
- Install the cover in the reverse order of removal.
Why are the lights on my Honda CRV going out?
The cluster lights within the CRV’s instrument panel are essential to safe driving at night. Excessive driving in dark conditions can lead to the lights eventually burning out. You will need to remove the instrument cluster from the dashboard to change the bulbs and repair the lights.
How to repair the instrument panel lights in a Honda CRV?
Disconnect the CRV’s negative battery cable. Wait at least three minutes to ensure the air bag is powerless. Open the fuse box in the underside of the dash and the driver’s side pocket and then remove the fasteners inside their openings. Grab the lower instrument panel cover and remove it by the lower clips first and then the upper clips.
Why does the blind spot monitor come on on a Honda CRV?
The Honda CR-V blind spot alert system is designed to detect and alert you of vehicle in the alert zones adjacent to your vehicle. The blind spot monitor warning light comes on for the following reasons: ▷ Warning light remains on when the system has been switched off.
What does the Honda CRV oil pressure light mean?
Honda CR V Engine Oil Pressure Light This Honda CR-V dashboard warning light comes on, and it indicates there’s not sufficient oil in your engine. Honda CR V Brake Warning Light If you notice BRAKE in your dashboard, it commonly indicates there’s no brake fluid in your Honda CR-V and a malfunction in the brake system.
How to replace a Honda CRV instrument cluster light?
Insert and twist the base clockwise. 6. Test to make sure it works 7. Pull base out…flip it over…twist it back in (if “Toshiba V-2” printed on the base is right-side up and the light doesn’t work, make sure it’s upside-down the second time you try) 8. Let there be light! Loading…
When to beep on Honda CRV instrument panel?
You will hear a beep when maximum or minimum brightness is reached. To reduce glare at night, the instrument panel illumination dims when you turn the light switch to or . Turning the select/ reset knob fully to the right until you hear a beep will cancel the reduced brightness.
What should I do if the warning light goes out on my Honda CRV?
If the warning light has not gone out after 10 seconds, immediately switch off the engine and do not continue driving. If the oil level was sufficient and you didn’t top up, do not continue driving, or do not continue driving if the warning light remains on even after adding oil. This will result in significant engine damage. ▷ Poor emissions.
The Honda CR-V blind spot alert system is designed to detect and alert you of vehicle in the alert zones adjacent to your vehicle. The blind spot monitor warning light comes on for the following reasons: ▷ Warning light remains on when the system has been switched off.