What does the malfunction indicator light on a Hyundai mean?
On Hyundai cars, this is called the Malfunction Indicator Lamp (MIL), but you’ll probably know it as the check engine light. When the check engine warning light is illuminated it’s often accompanied by tell-tale signs that the engine is not working properly, such as a lack of power or stuttering as you press the accelerator.
What does the left turn signal on a Hyundai mean?
The vehicle is drivable, but it is recommended to get it diagnosed by an auto mechanic as soon as possible. This light means that the left or right turn signal (blinker) is turned on. This light means that the high beams will turn on and off automatically, depending on the incoming traffic.
What does the ESC light mean on a Hyundai?
The ESC light will light up with the word ‘OFF’ if the system has been deactivated, in which case you may have inadvertently turned it off. To check, try stopping and restarting the engine. If the light remains on after restarting get it checked at a garage as the ESC system is an important safety feature.
Is it dangerous to drive without power steering?
You can but if the power steering system fails you will notice that the car is harder to manoeuvre and you should take extra care – it could be dangerous to drive at high motorway speeds without power steering assistance.
What kind of car is the 2011 Hyundai Equus?
And so, with the 2011 Equus, the company has its sights set on the top of the luxury heap: cars like the Lexus LS and Mercedes-Benz S-class. That bold goal comes with a proviso, however. The Equus was designed primarily with its home South Korean market in mind.
On Hyundai cars, this is called the Malfunction Indicator Lamp (MIL), but you’ll probably know it as the check engine light. When the check engine warning light is illuminated it’s often accompanied by tell-tale signs that the engine is not working properly, such as a lack of power or stuttering as you press the accelerator.
Is the driver’s seat on the Hyundai Equus massage?
The driver’s seat in every Equus has a massage function, although it feels more as if it came from a shopping-mall gadget store than a spa. Ponying up for the Ultimate replaces the rear bench seat with two individual thrones—one of which has a retractable footrest and a massage function.
Can you buy a Hyundai Equus without a dealership?
Depending on where they are (consumer-protection laws vary from state to state), some customers will be able to purchase an Equus without setting foot in the dealership. However a buyer takes possession of the car, servicing is all done without venturing to the dealership.
Why does my Hyundai Elantra have a check engine light?
Has the check engine light turned on in your Hyundai Elantra, Accent, Sonata, Kona, or Santa Fe? It can be alarming seeing an engine warning appear on your dashboard, especially if you’ve never seen it before. A wide array of issues can cause a check engine light to come on, some more serious than others.
What to do when your check engine light comes on?
No matter the situation, when the check engine light comes on in your Hyundai, we always suggest stopping by our service center so one of our knowledgeable technicians can properly diagnose and repair your vehicle. Our service technicians have the most up-to-date diagnostic equipment that can quickly read Hyundai OBD-II Trouble Codes.
What causes a check engine light on a Hyundai?
Fortunately AutoNation Hyundai North Richland Hills is here to help you figure out what might be wrong, and what your next steps should be. Below we have highlighted the most common causes of a check engine light. Loose Gas Cap: Your gas cap is loose, broken, or simply missing.
No matter the situation, when the check engine light comes on in your Hyundai, we always suggest stopping by our service center so one of our knowledgeable technicians can properly diagnose and repair your vehicle. Our service technicians have the most up-to-date diagnostic equipment that can quickly read Hyundai OBD-II Trouble Codes.
Why does my Infiniti check engine light keep blinking?
Gas cap issues can reduce fuel pressure and allow fuel vapors to escape, reducing fuel economy and increasing harmful emissions. Failing Catalytic Converter: Your catalytic converter can eventually clog with material, especially with higher mileage vehicles.
Why does my check engine light come on when I leave my cap off?
If you leave your gas cap off accidentally, you’ll notice this light rather quickly. These leaks in the gas tank recirculation (also known as EVAP emission control) system are often grouped as “small” or “large” leaks.
Why does the light come on on my Hyundai Santa Fe?
However, if you are not experiencing any drive-ability issues such as skipping, stalling, shifting problems, etc, then more than likely, the problem is going to lie in the EVAP (emissions control/recovery) system. Very commonly, this could be a faulty, loose or missing fuel cap or even putting fuel in while the vehicle is running can set the light.
Why does my DPF light come on in my Hyundai?
If you have a diesel Hyundai car, this light will come on if there is a problem with the exhaust particulate filter, which removes harmful soot from the exhaust gases to reduce emissions. It could indicate that the filter has become blocked with soot. Can I still drive with my DPF light on?
Why does the Hyundai Santa Fe malfunction indicator light come on?
Hyundai Santa Fe’s malfunction indicator… Hyundai Santa Fe’s malfunction indicator light came on while I was driving and has not gone off. There doesn’t seem to be any problem with my car. I checked all of the fluids because at first I thought it was a water faucet light and none of my fluids are low.
When does the warning light come on on a Hyundai?
If this occurs, have your vehicle checked by an authorized Hyundai dealer as soon as possible. The warning light also comes on and stays on when there is a problem with the Tire Pressure Monitoring System. If this happens, the system may not monitor the tire pressure. Have the system checked by an authorized Hyundai dealer as soon as possible.
Where is the malfunction indicator light on a Hyundai Elantra?
If you have access to a diagnostics scanner, you can plug into the OBD port under the steering column and check the code that initiated the malfunction indicator light. By interpreting the diagnostics codesyou get, you can get specific information that will help you narrow down the problem.
Why does the indicator light on my Hyundai Tucson not work?
The blinking green arrows on the instrument panel show the direction indicated by the turn signals. If the arrow comes on but does not blink, blinks more rapidly than normal, or does not illuminate at all, a malfunction in the turn signal system is indicated.
Why is my Hyundai Accent check engine light not working?
I had cleaned the engine a few days earlier but had not used it. Dampness got into the spark plug area and was causing a short. All is now ok but had to have the fault cleared from the memory. You are not to use water to clean the engine i was told. Water had got into the area of spark plugs and was causing a short.
When does the Check Engine light come on?
The check engine light only comes on in certain conditions: If the check engine light is coming on intermittently, be sure to notice any changes in the performance of your vehicle when the light is on. If you do notice a difference, try driving your vehicle as little as possible until you can bring it in for service.
Is the service engine light a Dirty Little Secret?
Money Saving Products I Use Search The Service Engine Light: Your Mechanic’s Dirty Little Secret Last updated: January 16, 2021 G.E. Miller214 Comments Troubleshoot the Check Engine Light]
When does the Mil light go out on a Hyundai Elantra?
This light will also illuminate when the ignition switch is turned to the ON position, and will go out in a few seconds after the engine is started. If it illuminates while driving, or does not illuminate when the ignition switch is turned to the ON position, take your vehicle to your nearest authorized HYUNDAI dealer and have the system checked.
When does the Hyundai Sonata check engine light go off?
In most cases, your Hyundai Sonata light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Nalley Hyundai so the light and code can be double-checked and reset.
What does it mean when your check engine light is flashing?
A steady glow typically means something less serious but a flashing check engine light indicates that your vehicle’s engine is in serious trouble and service is needed immediately. If your check engine light is flashing in your Hyundai Sonata, we highly recommend not to drive the vehicle and schedule Hyundai service today.
Where can I get a check engine light?
If you any additional questions regarding check engine lights, please give us a call at (817) 953-6549 to speak with one of our teammates, or simply schedule an appointment with our online form.
When to turn off the malfunction indicator light?
The DTC will give information about the detected issue. The OBD2 system can turn the MIL off automatically if the conditions for the problem stop to exist. After evaluating a system or component for three consecutive times without detecting the problem, the light can be turned off. But, usually the light remains on. What are the next steps?
Why are the brake lights not working on my Hyundai?
A MALFUNCTIONING STOP LAMP SWITCH MAY CAUSE THE BRAKE LIGHTS TO NOT ILLUMINATE WHEN THE BRAKE PEDAL IS DEPRESSED OR MAY CAUSE THE BRAKE LIGHTS TO REMAIN ILLUMINATED WHEN THE BRAKE PEDAL IS RELEASED.
What does a malfunction indicator light mean in a car?
The Malfunction Indicator Light can signal three different types of problems. Occasional flashes indicate temporary engine malfunctions. In this case, it is good to be aware of the possible forthcoming issues which can later on turn to more serious ones. The most common case is when the indicator light stays on constantly.
Are there any recalls on the Hyundai XG300?
It is focused on a malfunctioning stop lamp switch that may prevent brake lights from illuminating when the pedal is depressed (the same switch may also cause them to stay lit after the brakes are released). The second recall, affecting up to 175,765 1999-2004 Sonata, XG300, and XG350 models, is NHTSA Campaign 09V124000.
What to do when malfunction indicator light illuminates?
If you have a OBD-II scantool (for example one with ELM327 chip) and OBD diagnostic software, you can check the reason for the problem yourself. For example, our car diagnostic software can read the DTC code from the car and give you description of the code. Those will guide you towards the main cause of the problem.
When does the malfunction indicator light go out?
Malfunction Indicator Light. This light illuminates when there is a malfunction of an exhaust gas related component and the system is not functioning properly. This light will also illuminate when the ignition key is turned to the “ON” position, and will go out in a few seconds after the engine is started.
When does the exhaust gas light go out?
This light illuminates when there is a malfunction of an exhaust gas related component and the system is not functioning properly. This light will also illuminate when the ignition key is turned to the “ON” position, and will go out in a few seconds after the engine is started.
When does the indicator light go out in a Hyundai?
This light will also illuminate when the ignition key is turned to the “ON” position, and will go out in a few seconds after the engine is started. If it illuminates while driving, or does not illuminate when the ignition key is turned to the “ON” position, take your car to your nearest authorized Hyundai dealer and have the system checked.
If you have a diesel Hyundai car, this light will come on if there is a problem with the exhaust particulate filter, which removes harmful soot from the exhaust gases to reduce emissions. It could indicate that the filter has become blocked with soot. Can I still drive with my DPF light on?
This light illuminates when there is a malfunction of an exhaust gas related component and the system is not functioning properly. This light will also illuminate when the ignition key is turned to the “ON” position, and will go out in a few seconds after the engine is started.
Malfunction Indicator Light. This light illuminates when there is a malfunction of an exhaust gas related component and the system is not functioning properly. This light will also illuminate when the ignition key is turned to the “ON” position, and will go out in a few seconds after the engine is started.
What do the warning lights on the Hyundai Elantra mean?
Tire Pressure Monitoring System/Flat Tire Monitor Symbols, indicate that the inflation on one of the tires is down 25% or more. If your are at high speed, reduce your speed. For other dashboard Hyundai Elantra warning lights you can read: Automobile dashboard RED warnings lights symbols.
What does the malfunction indicator light tell you?
The malfunction indicator light provides you with information about the problem in two ways. The first is in the appearance of the light. If the check engine light flashes occasionally: This is a warning to have the vehicle serviced soon, and if this is ignored, it will grow into a bigger problem.
What does the check engine warning light mean?
When the check engine warning light is illuminated it’s often accompanied by tell-tale signs that the engine is not working properly, such as a lack of power or stuttering as you press the accelerator.
Is there a way to tell if a Hyundai Elantra has a malfunction?
Unfortunately, there are litterally 100’s of parts and sensors monitored in various systems, and to take a “guess” as to which part/sensor in which system is faulty, is virtually impossible.
This light will also illuminate when the ignition switch is turned to the ON position, and will go out in a few seconds after the engine is started. If it illuminates while driving, or does not illuminate when the ignition switch is turned to the ON position, take your vehicle to your nearest authorized HYUNDAI dealer and have the system checked.
If this light illuminates while driving, it indicates that a potential malfunction has been detected somewhere in the emission control system. This light will also illuminate when the ignition switch is turned to the ON position, and will go out in a few seconds after the engine is started.
Why is the warning light not working on my Hyundai Getz?
If the warning light does not illuminates, or remains when you turned the ignition key to the “ON” position, the Tire Pressure Monitoring System is not working properly. If this occurs, have your vehicle checked by an authorized Hyundai dealer as soon as possible.
If the warning light does not illuminates, or remains when you turned the ignition key to the “ON” position, the Tire Pressure Monitoring System is not working properly. If this occurs, have your vehicle checked by an authorized Hyundai dealer as soon as possible.
When the check engine warning light is illuminated it’s often accompanied by tell-tale signs that the engine is not working properly, such as a lack of power or stuttering as you press the accelerator.
Where do I find the fault code on my Hyundai?
Connect your OBD-II scanner into the OBD-2 port under the dashboard on the driver’s side. Note: Even a $20 generic OBD-2 scanner can retrieve check engine / ECU Hyundai fault codes. Those are P-codes in the Hyundai list below.
What is the fault code for the Hyundai Elantra?
Hyundai Sonata, Excel 90 on , Scoupe 91 & 92 , Elantra. Hyundai Scoupe 93 through 95 and Accent vehicles. 4155 ECM failure A/C relay, IAC, PC.” You will need a Hyundai multi-system OBD-2 scanner to read Hyundai specific fault codes.
Connect your OBD-II scanner into the OBD-2 port under the dashboard on the driver’s side. Note: Even a $20 generic OBD-2 scanner can retrieve check engine / ECU Hyundai fault codes. Those are P-codes in the Hyundai list below.
The ESC light will light up with the word ‘OFF’ if the system has been deactivated, in which case you may have inadvertently turned it off. To check, try stopping and restarting the engine. If the light remains on after restarting get it checked at a garage as the ESC system is an important safety feature.
Hyundai Sonata, Excel 90 on , Scoupe 91 & 92 , Elantra. Hyundai Scoupe 93 through 95 and Accent vehicles. 4155 ECM failure A/C relay, IAC, PC.” You will need a Hyundai multi-system OBD-2 scanner to read Hyundai specific fault codes.
Why does my 2004 Hyundai Atos Prime not start?
There are a number of issues that can go wrong with starting system and make your 2004 Hyundai Atos Prime car won’t start or hard time to start – This article guides you through some of the facts behind the starting system, and the components that may be to blame, and tells you what action you can take to try to remedy each situation.
What is the DTC code for a Hyundai?
In this article, you will find a complete list of Hyundai Trouble Codes. This list contains more than the Hyundai Check Engine Codes. Here you will find Hyundai ABS, Airbag, and Transmission DTC codes. P0244 Turbocharger/Supercharger Wastegate Sol.
What do I need to know about Hyundai Atos?
Instrument cluster (Air bag IND.) WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.
There are a number of issues that can go wrong with starting system and make your 2004 Hyundai Atos Prime car won’t start or hard time to start – This article guides you through some of the facts behind the starting system, and the components that may be to blame, and tells you what action you can take to try to remedy each situation.
What does the ABS light mean on a Hyundai?
The vehicle can be operated with the ABS light on, but should not be driven if PARK or BRAKE light come on as well. This light means there is a problem with the electric power steering. The steering wheel may be tough to turn. This light means that oil pressure is too low.
Why does my check engine light keep blinking?
If the check engine light in your Hyundai Sonata starts glaring, that means that the problem needs immediate attention and your Hyundai should be brought in quickly. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.
What do the warning lights on a Hyundai i10 mean?
Whether you’re driving an i10, i20, i30, Ionic, Kona, Santa Fe or another model, the warning lights on your Hyundai’s dashboard follow a traffic light colour system: Modern Hyundai cars are filled with a raft of sensors that monitor how each system in the car is functioning.
When does the Hyundai Tucson master warning light come on?
The amber triangle containing an exclamation mark is the Hyundai Tucson master warning light. The warning light comes on along with a message when a maintenance issue or non-critical malfunction occurs. For example: low washer fluid, Blind Spot Detection (BSD) malfunction, Tire Pressure Monitoring System
When does the Mil light come on on a Hyundai Tucson?
Have the system checked as soon as possible. The Hyundai Tucson malfunction indicator light (MIL), often referred to a the check engine light comes on and stays on when there’s a malfunction with the emission control system.
What does check engine light on Hyundai Tucson mean?
On the petrol version of the Hyundai Tucson, if the check engine light is flashing, it usually means an engine misfire is occurring. In this instance, damage to the catalytic converter may occur. Immediately reduce speed until the light stops flashing.
The amber triangle containing an exclamation mark is the Hyundai Tucson master warning light. The warning light comes on along with a message when a maintenance issue or non-critical malfunction occurs. For example: low washer fluid, Blind Spot Detection (BSD) malfunction, Tire Pressure Monitoring System
Have the system checked as soon as possible. The Hyundai Tucson malfunction indicator light (MIL), often referred to a the check engine light comes on and stays on when there’s a malfunction with the emission control system.
What does check engine light on Hyundai Sonata mean?
A check engine light can indicate a broad spectrum of problems with your 2011 Hyundai Sonata. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.
What should I do if my Hyundai Sonata oil pressure light is not on?
With the engine off, check the engine oil level. If the level is low, add oil as required. If the warning light remains on after adding oil or if oil is not available, call an authorized HYUNDAI dealer. If the engine is not stopped immediately after the engine oil pressure warning light is illuminated, severe damage could result.
What should I do if my Hyundai Accent warning light is not working?
1. Drive safely to the side of the road and stop. 2. With the engine off, check the engine oil level. If the level is low, add oil as required. If the warning light remains on after adding oil or if oil is not available, call an authorized HYUNDAI dealer.
What happens if you have a malfunction indicator light?
Prolonged driving with the Malfunction Indicator Light illuminated may cause damage to the emission control systems which could effect drivability and/or fuel economy. If the Malfunction Indicator Light illuminates or blinks, potential catalytic converter damage is possible. This could result in loss of engine power.
Can a malfunction indicator light affect fuel economy?
Generally, your vehicle will continue to be drivable, but have the system checked by an authorized HYUNDAI dealer promptly. Prolonged driving with the Malfunction Indicator Light illuminated may cause damage to the emission control systems which could effect drivability and/or fuel economy.
Why does my indicator light illuminate while driving?
Now we are back at home and dig out the manual, it seems “this indicator light is part of the engine control system which monitors various emission control system components”, “if this light illuminates whilst driving, it indicates that a potential problem has been detected somewhere in the emission control system”.
Now we are back at home and dig out the manual, it seems “this indicator light is part of the engine control system which monitors various emission control system components”, “if this light illuminates whilst driving, it indicates that a potential problem has been detected somewhere in the emission control system”.
Generally, your vehicle will continue to be drivable, but have the system checked by an authorized HYUNDAI dealer promptly. Prolonged driving with the Malfunction Indicator Light illuminated may cause damage to the emission control systems which could effect drivability and/or fuel economy.
What was the colour of the Hyundai F2 Evolution?
The “F2 Evolution” was available with just two colour options, either Silver (metallic) or Cobalt Blue (metallic). It was intended as a limited edition of 1500 units, (though 1513 units were eventually produced).
How to reset the dashboard warning light on a Hyundai?
If you need to reset a dashboard warning light or diagnose an engine diagnostic fault trouble code on your Hyundai we would recommend the iCarsoft KR V1.0 Hyundai OBD Code Reader. Select your vehicle below to see the dashboard layout and symbols/warning lights.
What should I do if my Hyundai Charger warning light is still on?
Visit your local Hyundai service center. If this light remains on after the engine has turned on, there may be a problem with your emission control system or catalytic converter. Visit your local Hyundai service center. If the charging system warning light is illuminated after the engine begins running, your vehicle’s battery is not being charged.
What does the charging system warning light on a Hyundai mean?
Visit your local Hyundai service center. If the charging system warning light is illuminated after the engine begins running, your vehicle’s battery is not being charged. This light signals that your engine oil pressure is low. Pull over to a safe location and turn off your vehicle.
The vehicle is drivable, but it is recommended to get it diagnosed by an auto mechanic as soon as possible. This light means that the left or right turn signal (blinker) is turned on. This light means that the high beams will turn on and off automatically, depending on the incoming traffic.
What does the ESC indicator light on a Hyundai mean?
Electronic Stability Control (ESC) Indicator Light. If this light is blinking, that signals the ESC system is in use. If this light is not flashing, that signals a malfunction with the ESC system. If your system has malfunctioned, visit your local Hyundai service center.
What does the Hyundai sport mode indicator light mean?
When this indicator light is displayed as white or green, that signals the system is currently on or in use. If this indicator light is displayed as red, there is a system malfunction and you should visit your local Hyundai service center. This indicator light signals that SPORT mode is currently the driving mode in use.