What does the Check Engine light on a Hyundai Santa Fe mean?

Hyundai Santa Fe check engine warning light – if the check engine symbol lamp illuminates on the dash of your Santa Fe, it indicates that there is a fault within the electrical engine module of your vehicle.

When does the Hyundai Santa Fe immobiliser warning light go out?

Hyundai Santa Fe immobiliser key warning light – the immobiliser indicator light illuminates after the ignition key is turned to the “ON” position. The light goes out after the engine is running or after 30 seconds.

Is there a warning light on my dashboard?

So, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Hyundai. Click a link to learn more about each one.

What kind of engine does Sante Fe GLS have?

2002 sante fe gls model. I have a 2007 Hyundai Santa Fe and have been told my engine wiring harness has been chewed/cut. Everything works except the TPMS light is always on and the AC does not get cold (so check engine light is on), looks like the wire to the compressor.

Why are there warning lights on my Santa Fe?

Hyundai Santa Fe brake warning light – the brake symbol lamp can illuminate for a number of reasons including the following: – Your handbrake is in the ON position – Your brake fluid is tool low (check your levels and top up if needed) – There is a fault within the ABS system.

Can a Hyundai Santa Fe airbag warning light be removed?

You can diagnose the engine module with the iCarsoft i901 Hyundai OBD Code Reader which will also allow you to clear the fault codes and remove the engine warning light from the dashboard. Hyundai Santa Fe airbag warning light – the airbag symbol lamp will only illuminate if there is an issue or fault in this system.

Why does the immobiliser light go out on a Hyundai Santa Fe?

It could be a faulty alternator that is causing the fault. Hyundai Santa Fe immobiliser key warning light – the immobiliser indicator light illuminates after the ignition key is turned to the “ON” position. The light goes out after the engine is running or after 30 seconds.

What was the problem with my Hyundai Santa Fe?

Search CarComplaints.com for these popular complaint phrases… My 2008 Hyundai Santa Fe stalled twice today. It also stalled on the same day twice last week. This happened each time I came to a stop light or wanted to make a turn. The engine stopped running, the power steering ceased working, and check engine light came on.

What’s the price of a Hyundai Santa Fe engine?

Hyundai Santa Fe Engine hesitates during acceleration Inspection costs $89 on average. It can be frustrating for any driver to expect certain acceleration from their vehicle only to find that the vehicle seems to be hesitant while speeding up.

What causes a flashing check engine light on a Hyundai Santa Fe?

While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Santa Fe’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped.

What can a faulty O2 sensor do to a Hyundai Santa Fe?

A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your Hyundai Santa Fe’s spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to suggest the polite assortment of air and fuel that enters the cylinders in your engine.

What does it mean when your check engine light is flashing?

A steady glow typically means something less serious but a flashing check engine light indicates that your vehicle’s engine is in serious trouble and service is needed immediately. If your check engine light is flashing in your Hyundai Santa Fe, we highly recommend not to drive the vehicle and schedule Hyundai service today.

What are the warning lights on a Hyundai?

They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are nearly 70 of them, so search carefully! Models examined include Accent, IONIQ, Kona, Elantra, NEXO, Santa Fe, Sonata, Tucson, Veloster and Venue.

What causes a Hyundai Santa Fe engine to misfire?

There are other misfire related codes as well, but those are the most common ones. Keeping in mind that any engine needs air, fuel, and spark for ignition, your Hyundai Santa Fe’s fuel system can often cause the engine to misfire. It can run too lean or rich.

What should battery voltage be on Hyundai Santa Fe?

Specifically, you’ll need to set it to 20V DC. With your Santa Fe turned off, you’ll connect the negative side of the meter to the negative battery post or wire. Touch the positive side of the voltmeter to the positive battery wire. With the engine off, you should get a reading somewhere between 12.0 volts and 12.6 volts.

What does a flashing check engine light mean?

A flashing check engine light is your Hyundai Santa Fe’s way of saying “I have a serious problem, don’t ignore me”. Most of the time, that serious problem is a misfire. This flashing light should not be ignored. When your engine is misfiring, it is dumping raw fuel into the exhaust.

How can I tell if my Santa Fe is having problems?

This will help your mechanic evaluate the issue. Steady Check Engine Light: If your check engine light is on every time you operate your Santa Fe, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises.

What is mass airflow sensor on Hyundai Santa Fe?

The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is basic to run your engine efficiently by measuring the eject of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to accurate changes, identical altitude.

Why is the Check Engine light on in a Hyundai?

The Hyundai Tucson malfunction indicator light (MIL), often referred to a the check engine light comes on and stays on when there’s a malfunction with the emission control system. Usual causes of the check engine warning light are faulty mass airflow sensor, faulty oxygen sensor or faulty exhaust gas recirculation valve (EGR).

What does the malfunction indicator light mean on a Hyundai?

Hyundai Elantra: Malfunction indicator light (MIL) (check engine light) This indicator light is part of the Engine Control System which monitors various emission control system components. If this light illuminates while driving, it indicates that a potential malfunction has been detected somewhere in the emission control system.

What is Santa Fe vehicle?

The Hyundai Santa Fe (Korean: 현대 싼타페) is a sport utility vehicle (SUV) produced by the South Korean manufacturer Hyundai since 2000.

Why does the warning light come on on my Hyundai i10?

The warning light also comes on and stays on when there is a malfunction with the Tire Pressure Monitoring System. If this happens, the system may not monitor the tire pressure. Have the system checked by an authorized Hyundai dealer as soon as possible.

Why is the Check Engine light coming on on my Hyundai Santa Fe?

The check engine light on your Hyundai Santa Fe will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it’s tightened, the light will turn itself off.

What to do if your Hyundai Santa Fe malfunctions?

Check under the vehicle, around the rear areas of the vehicle, looking for any vacuum lines that have dry-rot cracks, holes or loose/missing connections. If these all check out, then the best thing to do at this point is to have the Diagnostic Trouble Codes (aka “p-codes”) read from the on-board computer.

Where was the 2004 Hyundai Santa Fe last serviced?

Mileage: 184,951 miles Body Type: SUV Color: Gold Engine: 4 Cyl 2.4 L Accident reported: airbag deployed. Purchased on 11/07/03 and owned in OH until 11/05/20. Driven an estimated 8,646 miles/year. Last serviced at 136,860 miles in Cincinnati, OH on 11/02/19 • Vehicle serviced • Oil and filter changed.

What do the warning lights on a Hyundai Santa Fe mean?

Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention. This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. – It illuminates for approximately 6 seconds and then goes off.

When does the ABS light come on on a Santa Fe?

Your Hyundai Santa Fe’s ABS Light comes on when it fails a self diagnostic cycle. When on, it indicates that the Santa Fe does not have Anti-Lock brakes, and the safety they provide. Your Santa Fe’s ABS system uses a system of sensors to determine wheel speed when braking.

How do you turn off the brake light on a Santa Fe?

The only way to turn the brake light off is to restore proper line pressure to both brake circuits when the pedal is pushed. If your Santa Fe is having trouble stopping, or noticeably leaking fluid, don’t drive it. Just have it towed to a mechanic. If you mess up fixing your engine, the vehicle does not move.

Navigation