What does the brake warning light on a Subaru Forester mean?
Your Subaru Forester ‘s brake light indicator is there to let you know that there is an issue with the brake system. It is different than the anti-lock brake system, which gets its own ABS warning light. The brake light indicates that there is a problem with the physical braking system itself.
Is there a recall on a Subaru brake light switch?
Brake Lamp Switch Recall At the end of February 2019, Subaru recalled brake light switch in 2.3 million vehicles, including the 2013-2017 Crosstrek, 2014-2016 Forester, 2008-2016 Impreza (4-door), 2012-2016 Impreza (5-door), and 2008-2014 WRX (4-door).
Are there any recalls on 2019 Subaru Forester?
The 2019 Subaru Forester was subject to a recall in December 2019 because of sudden “loss of power while driving” and earlier that year for “loss of electric power assist. ” Trailing vehicles must be alerted when the driver applies the brakes. If the brake light is out, the risk of a rear-end collision greatly increases.
What is the TSB number on a Subaru Crosstrek?
The TSB applied to the switch (part number 83311FJ001*) found in the 2014-2016 Forester, 2008-2014 WRX and STI, 2012-2014 Impreza (2.0L), and the 2013-0216 XV Crosstrek (non hybrid model). The brake lights are a tell-tale sign of a brake lamp switch problem.
Your Subaru Forester ‘s brake light indicator is there to let you know that there is an issue with the brake system. It is different than the anti-lock brake system, which gets its own ABS warning light. The brake light indicates that there is a problem with the physical braking system itself.
Brake Lamp Switch Recall At the end of February 2019, Subaru recalled brake light switch in 2.3 million vehicles, including the 2013-2017 Crosstrek, 2014-2016 Forester, 2008-2016 Impreza (4-door), 2012-2016 Impreza (5-door), and 2008-2014 WRX (4-door).
The 2019 Subaru Forester was subject to a recall in December 2019 because of sudden “loss of power while driving” and earlier that year for “loss of electric power assist. ” Trailing vehicles must be alerted when the driver applies the brakes. If the brake light is out, the risk of a rear-end collision greatly increases.
The TSB applied to the switch (part number 83311FJ001*) found in the 2014-2016 Forester, 2008-2014 WRX and STI, 2012-2014 Impreza (2.0L), and the 2013-0216 XV Crosstrek (non hybrid model). The brake lights are a tell-tale sign of a brake lamp switch problem.
What is the traction control light on a Subaru Forester?
CEL + Traction control light steady + blinking/fading cruise control light in my 2012 Forester. Car was running fine otherwise. The very accomodating Subaru dealer in Waterloo, Iowa got us right in and followed the diagnostic steps the computer showed and found it required a software update.
Why is the brake light switch on my Subaru not working?
A build-up of chemicals from certain scented cleaning products containing silicone can disable the brake light switch in millions of Subaru vehicles. Subaru says that over time certain cleaning products you use inside the car can deposit a layer of silicone goop on the switch’s internal electrical contact.
Is the brake light blinking ON MY 2012 Outback?
My 2012 Outback 2.5i Premium had the CEL, CC flashing, brake light blinking, etc. with only 316 miles on the odometer. It occured on a Saturday afternoon during its first road trip. After pulling off onto the shoulder, I checked the fluid levels and the gas cap. My wife also checked the gas cap and then I checked it again.
CEL + Traction control light steady + blinking/fading cruise control light in my 2012 Forester. Car was running fine otherwise. The very accomodating Subaru dealer in Waterloo, Iowa got us right in and followed the diagnostic steps the computer showed and found it required a software update.
What does the ABS light on a forester mean?
The ABS light is different than the brake warning light itself. The brake light indicates that there is a problem with the physical braking system and that your Forester is unsafe to drive. Yes, you can drive your Forester with the ABS light on.
A build-up of chemicals from certain scented cleaning products containing silicone can disable the brake light switch in millions of Subaru vehicles. Subaru says that over time certain cleaning products you use inside the car can deposit a layer of silicone goop on the switch’s internal electrical contact.
Can you drive with a brake warning light on?
We do not recommend driving with this light on at all. Doing so may lead to injury when the brakes fail. The brake warning light indicates that your Forester has detected that one of its major brake components has failed, typically detected through a loss of pressure.
Why does my brake light only come on when I push the brakes?
If the brake light is only coming on when you push the brakes, that’s a definite indication that the pressure in the brake system is too low. Either the brakes need bled, or there is a leak. Since you’ve already checked the emergency brake handle, now it’s time to check the master cylinder and see if the brake fluid is low or not.
Why is the brake warning light on on my Chevy Tahoe?
If it’s engaged, the brake light will stay lit. If the handle isn’t all of the way down, it’ll cause the brake warning light to stay on. Check to make sure that there isn’t the little bit left that it needs to turn the brake light off.
Why does my Subaru check engine light come on?
by Alibaster Smith. The Subaru check engine light comes on when there is a problem with the Subaru’s emissions control system. The Subaru’s computer, called an ECU, generates fault codes that pertain to various sensors on the vehicle. If one of these sensors fails, it will trigger a fault code.
The ABS light is different than the brake warning light itself. The brake light indicates that there is a problem with the physical braking system and that your Forester is unsafe to drive. Yes, you can drive your Forester with the ABS light on.
What does check engine light mean on Subaru Outback?
While driving down the highway in my 2011 Outback, my ‘check engine’ light suddenly went on, the ‘brake’ light flashed, another light came on indicating a car sliding, another light that was a picture of a headlight, my remote was disabled, and my Nav system went on and off. My Subaru dealer couldn’t take me for 3 weeks.
When does the anti lock brake warning light come on?
There are times when the anti-lock brake warning light may come on on your car’s dashboard when the brakes are in good condition. It may even happen after you have recently had the brakes serviced. If you know your car’s anti-lock brake system is in good condition and the light is still on, there are some steps you can take to reset the light.