What does spanner symbol mean on brivis?
The Brivis spanner symbol showing indicates that your Brivis Heater is due for a tune–up! Many people aren’t aware that all Gas Heaters require an annual maintenance to operate as efficiently and safely as possible.
Why is my brivis heater not working?
Brivis Classic models that have not started to blow warm air after 30 minutes will require a reset. To do this, turn the Wall Control OFF, and then wait for 5 seconds before turning the Wall Control back ON. You need to do this 3 times in one minute to reset the heater.
How do I troubleshoot my central heating system?
Check the thermostat for power and proper settings. Turn on the thermostat and set the temperature so the heater comes on. If it does not come on, locate the circuit breaker for the central heating unit and verify that the breaker is functional. Turn it off and on again, in case it has tripped.
Why does my gas heater not work?
There are a variety of reasons why your boiler may not be working; common examples include the boiler pressure being too low or too high, a power cut, gas supply issues, a faulty pilot light, a frozen condensate pipe, faulty internal components or a more complex issue.
Why is my heat not coming on?
Dirty filters are the most common cause of furnace problems. Dust and dirt restrict airflow—and if the filter gets too clogged, the heat exchanger will overheat and shut off too quickly, and your house won’t warm up. If the blower is running but no heat is coming out, replace the filter.
What does it mean when your heater won’t turn on?
Check the Pilot Light – A dirty or faulty pilot light is one of the main reasons a gas furnace won’t start. Make Sure Natural Gas Is Flowing into the Furnace – If your furnace won’t start, it may be because the unit isn’t getting any fuel. Simply check the gas control valve to ensure it’s in the “On” position.
Why won’t my central heat come on?
Two of the most common reasons your home central heating isn’t working are a dirty flame sensor and a dirty air filter. Clean the flame sensor with a steel wool pad and replace the air filter every 1-2 months. This will help prevent future problems.