What does it mean when your jet ski wont start?
In case if one of the spark plugs is wet, that means that the ignition or the carburetor has a problem or that the cylinder is not working properly. By using the starter, spin and turn the engine over with the plugs inserted in the plug boots.
Do you need to wash your jet ski?
For good maintenance and to prevent damage to your Jet Ski, it is highly recommendable to wash the Jet Ski with fresh water after each use. Then it should be dried on fresh air and stored properly. The sunlight also damages the machine, so you should always cover it with some kind of protection.
What do you need to know about jet skis?
Jet skis are machines that are created to run fast on water surfaces. They have a very good design and quality mechanics, but they still endure lots of battering and high speed abuse. To insure the ability to use your jet ski for a long period of time you must take a proper care and maintain it.
Are there any problems with a Kawasaki Jet Ski?
Kawasaki Jet skis are know to have issues with their round body carbs. They are difficult to tune and give many people many issues. The Jet ski Carb for the 550 Jet Ski is a Mikuni 38 mm Carburetor. The main problem comes from their setup. Standard Carbs have a only a high and a low needle for idle adjustments and high RPM.
In case if one of the spark plugs is wet, that means that the ignition or the carburetor has a problem or that the cylinder is not working properly. By using the starter, spin and turn the engine over with the plugs inserted in the plug boots.
How does a Kawasaki Jet Ski carbuerator work?
POP-OFF PRESSURE -Just off idle to 1/4 throttle in conjunction with the low speed jet. 3. LOW SPEED JET -Just off idle to 1/3 throttle. 4. HIGH SPEED JET – 1/3 to 3/4 throttle. 5. HIGH SPEED ADJUSTER -3/4 to wide open throttle.
Is it possible to tune a jet ski carb?
Tuning a Jet Ski carb is extremely difficult and requires that you do it in the water. Below you will find information on how it works and how to tune your jet ski. Accurately tuning a PWC carburetor requires a basic understanding of its functions and adhering to a few basic rules.