What does E20 on a Zanussi washing machine mean?
Check for a blocked drain. Check whether the drains are draining satisfactorily. Try a wash with the drain hose in a bowl or sink. if the washing machine is working correctly after the test wash, it may indicate that the siphon/outlet is clogged – make sure the siphon/outlet is clear.
What E20 means?
The E20 error code is a class code that indicates a drain problem in the washer. This is consistent with the drain and spin problem that you are observing.
Why does my washing machine say E20?
Issue: Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes. It indicates pumping problems. The appliance makes an unusual noise because of the blockage of the drain pump.
How do you unblock a washing machine?
How to unblock Your Washing Machine (8 Easy Steps):
- Turn your washing machine off at the plug.
- Locate the pump filter.
- Place a bucket, towel or even a baking tray under the pump filter.
- Unscrew the pump filter SLOWLY.
- Wait for the water to finish draining.
- Check to see if there is a block.
Can you reset a Zanussi washing machine?
Resetting guide: Press the two buttons at the top (soak and pre-wash). At the same time, turn the cycle selector counter-clockwise to the delicate spin cycle. Then release the two buttons and continue turning the selector counter-clockwise all the way round to off (almost one full turn). Try to wash normally.
What is E20 washing machine?
Appliance displays error code E20, E21 or C2 – or emits 2 beeps / 2 flashes when your machine has detected that the drum of the machine will not drain.
How do I know if my washing machine pump is clogged?
Remove the drain hose by unscrewing the clamps holding it to the pump outlet. Look for blockages inside the hose, says Family Handyman. If you don’t see any, the pump may be blocked or faulty. To check it, you have to disconnect the belt connecting it to the drive motor.