What does E 18 mean on a Siemens washing machine?
E18 appears in the display: The filter is blocked or the cold drainage hose is blocked or kinked.
What does F 18 mean on a Bosch washing machine?
Washing machine troubleshooting: error codes E18 or F18 These error codes indicate the pump time has exceeded its limits. Why am I getting this washing machine error code? This could happen for several reasons: blockage inside the filter, blockage inside the draining hose or a problem with the pump.
What does E18 mean on a Beko washing machine?
E18. This final error code means an unbalanced washing load has been detected during a cycle, if your washing machine doesn’t spin then this can also cause the E18 error. Thankfully simply stopping the cycle, reloading and then restarting it should solve the issue.
How do I reset the code on my Siemens washing machine?
How to reset an error code on a washing machine by Bosch, Neff, or Siemens. Press and hold down on the spin button and simultaneously turn the dial to the 7 o’clock position. Hold the spin button for around 5 seconds and then release. Turn the dial to the off position.
Why is my Bosch washer not draining?
A Bosch washer not draining properly is often due to a drain hose obstruction. Blockages are often due to kinks in the hose or clogs formed by lint, debris or foreign objects that restrict water flow. Straightening the hose to remove the kink may restore water flow.
What is code F18?
Internal data error
F18 — Internal data error.
What does E02 mean on a Bosch washing machine?
Bosch Nexxt 500 series washer displays the E02 error code. It signals about problems with the electric motor of the device. In this case, the drum does not rotate when the washing program is run, or the program does not start at all. Bosch washer error code e02.
How do you reset a Bosch Logixx 7 washing machine?
Turn the appliance knob to the off or reset position, 12 oclock. Turn the knob to the 6 oclock position. Press and hold the spin button and while holding the spin button turn the knob to the 7 oclock position. When your turn it back on it should have cleared the error code.
What does E21 mean on washing machine?
Drain flow error
E21 – Drain flow error. This error will be displayed when the unit senses that the drain process is taking too long. This error may be caused by a blockage occurring in the coin trap or in the drain line. Check and clean the coin trap. The Coin Trap can collect small objects from the wash cycle.