What does code 83-1 mean on Honda CRV?
Code 83-1 set in the ABS system means that the ABS system has been disabled due to an engine related system failure. In this case Code P2101 being set in the Engine computer (PCM) relating to the electronic throttle actuator has disabled the ABS system and set a code 83-1 to inform you of that. Click to expand…
When to use the p2422 Honda engine code?
3. If either Temporary DTC (P1454 or P2422) is stored and excessive vacuum is detected, the PCM stores the DTC of the Temporary DTC that was stored. Need more information on how to fix the P2422 HONDA code?
Is there an 83-1 code for Honda Pilot?
Filled the tank with 93 octane, no change..approx 28 codes that are either pending or confirmed, most point to ecu communication but already tried a different exu and still same issue. I removed the abs fuses and relays to rule out the vsa modulator and same issue!
What is the model of your Honda 83?
VSA light and 83-1 ECM/PCM Relationship Failure according to AutoZone guy with a handheld scanner? Mechanic’s Assistant: Just to clarify, what are the exact lights you’re talking about? VSA, a little upside down triangle, and the engine service light. Mechanic’s Assistant: What is the model of your ’83 Honda? Not an 83. It’s a 2008
I’ll see what Honda finds out about the problem, and how much they will charge to purchase and install whatever needs fix. 83-1 is not an engine code, but an Antilock Brake/Traction/Stability control code. It means that those systems are disabled because of an issue with the engine.
What is Honda Service Bulletin 15-010 and fix for p2422?
What is Honda Service Bulletin 15-010 and fix for P2422? Honda has issued service bulletin 15-010 to address a P2422 trouble code on the vehicles listed below. The P2422 — EVAP canister vent shut valve stuck closed malfunction is caused by dirt accumulation in the EVAP charcoal canister vent tube.
What does the p2422 Honda fuel tank sensor mean?
P2422 HONDA Meaning The fuel tank pressure (FTP) sensor output indicates about atmospheric pressure 0 kPa (0 in.Hg, 0 mmHg) before purge starts since the evaporative emission (EVAP) canister vent shut valve is normally open (open to the atmosphere). The sensor indicates a negative pressure value (vacuum) during purging.
Why is the EVAP valve on my Honda p2422 stuck?
The P2422 — EVAP canister vent shut valve stuck closed malfunction is caused by dirt accumulation in the EVAP charcoal canister vent tube. For more information on EVAP systems and how they work, see this post.
What does code 83-1 mean on ABS system?
Code 83-1 set in the ABS system means that the ABS system has been disabled due to an engine related system failure. In this case Code P2101 being set in the Engine computer (PCM) relating to the electronic throttle actuator has disabled the ABS system and set a code 83-1 to inform you of that.
What is the OBD2 code for a Honda?
OBDII Honda Code Definitions. Be sure to double check the codes. Anything P1000 to P1999 or P3000 to P3400 will be Manufacturer specific and may not match the ones listed here. Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles.
What does it mean when DTC 83-1 says no VSP signal?
DTC 83-1 says “No VSP Signal”, DTC 83-1 also says ” PCM Com Error” The manual says to erase the DTC and then drive vehicle for 7 to 10 miles While checking the TPMS data list for proper vehicle speed on a scanner If correct speed then system is okay at this time. If not then it goes into how to troubleshoot the Can Bus lines
Code 83-1 set in the ABS system means that the ABS system has been disabled due to an engine related system failure. In this case Code P2101 being set in the Engine computer (PCM) relating to the electronic throttle actuator has disabled the ABS system and set a code 83-1 to inform you of that. Click to expand…
Are there any codes for the 83-1 code?
Series of codes present but the ones that remain current are the 83-1 ECM relation malfunction 86-1 Control area network malfunction. Anyone have any ideas where to begin? Possible ECM falure or possible VSA module falure? Hopefully someone had a similar experience… I tried a different ecm, same issue.
Code 83-1 set in the ABS system means that the ABS system has been disabled due to an engine related system failure. In this case Code P2101 being set in the Engine computer (PCM) relating to the electronic throttle actuator has disabled the ABS system and set a code 83-1 to inform you of that.
Filled the tank with 93 octane, no change..approx 28 codes that are either pending or confirmed, most point to ecu communication but already tried a different exu and still same issue. I removed the abs fuses and relays to rule out the vsa modulator and same issue!
I’ll see what Honda finds out about the problem, and how much they will charge to purchase and install whatever needs fix. 83-1 is not an engine code, but an Antilock Brake/Traction/Stability control code. It means that those systems are disabled because of an issue with the engine.
What’s the ECM code on a Honda CRV?
Have an 07 CRV, 2nd owner. 130k miles. Regularly serviced. Starts right up, idles fine. When you hit the gas, it runs really rough then stalls. It is throwing the 83-1 ECM/PCM code. Computer has been replaced, and reprogrammed.
What are the VSA light and 83-1 ECM / PCM?
VSA light and 83-1… VSA light and 83-1 ECM/PCM Relationship Failure according to AutoZone guy with a handheld scanner? Mechanic’s Assistant: Just to clarify, what are the exact lights you’re talking about? VSA, a little upside down triangle, and the engine service light.
What’s the code on Honda CRV engine light?
The code came back as 83-1 Engine Control Module (ECM) Powertrain Control Module (PCM) Relation malfunction. I’m taking it into my local Honda repair shop for a $130 diagnostic test to see what they say. I’m hoping the fix isn’t to costly as I am poor. The oil life in the car says 80% so I’d say I’m good there. Any help?
Have an 07 CRV, 2nd owner. 130k miles. Regularly serviced. Starts right up, idles fine. When you hit the gas, it runs really rough then stalls. It is throwing the 83-1 ECM/PCM code. Computer has been replaced, and reprogrammed.
VSA light and 83-1… VSA light and 83-1 ECM/PCM Relationship Failure according to AutoZone guy with a handheld scanner? Mechanic’s Assistant: Just to clarify, what are the exact lights you’re talking about? VSA, a little upside down triangle, and the engine service light.
The code came back as 83-1 Engine Control Module (ECM) Powertrain Control Module (PCM) Relation malfunction. I’m taking it into my local Honda repair shop for a $130 diagnostic test to see what they say. I’m hoping the fix isn’t to costly as I am poor. The oil life in the car says 80% so I’d say I’m good there. Any help?
What’s the weird code on the VSA light?
Has 134K on it The code was a weird code. 85-1 or something like that. ECM/PCM Relationship Failure. No other code. But, the VSA light is on too Apparently, this code is well known.
What are the VSA codes on a 2005 Honda CRV?
2005 honda crv vsa codes 61-1 volt failure & 83-1 ECM Relation failure. These are the two problem codes read when I had the CRV scanned because of a VSA problem. Also had a P2646 code but I read your … read more
What does code 61-1 on Honda Odyssey mean?
ASE Certified, Ford Master… Code 61-1 on Honda CR-V 2005. 61-1. O Rielly technician says Had a 83-1 code for the VSA indicators. Lots of rain Had a 83-1 code for the VSA indicators. Lots of rain yesterday. These indicators no longer showing. … read more 2009 honda odyssey with a code 83-1 ECM. Also there are
What is the VSA code for a Honda CRV?
VSA warning light Common fault codes: 66-1 – Brake Pressure Sensor Affected Vehicles: Honda CR-V 2002-2008 (2 nd and 3 rd generation) Honda Accord 2003-2008 (7 th generation)
When did the Honda CRV ABS module fail?
Honda CRV ABS/VSA Pump module fault This ABS Pump Module is a very common failure for the Honda CR-V built between 2002 – 2008. The fault causes the VSA/ABS light to illuminate permanently on the instrument cluster.
What is the 83-1 code on a Honda Pilot?
Had a 83-1 code for the VSA indicators. Lots of rain Had a 83-1 code for the VSA indicators. Lots of rain yesterday. These indicators no longer showing. … read more Online Automotive Repair C… Vocational, Technical or Tra… I just read about the check engine code 83-1 (ABS) on a 07 Honda Pilot and what it means.
What do the numbers mean on Honda ABS code?
• Code sequence begins with a 2 second flash. • Each following code is made up of two series of flashes. • The long flashes indicate the ‘tens’ digits. • The short flashes indicate the ‘ones’ digits. • A long pause separates each code sequence. • Once every code has been displayed the code sequence repeats. • Code Format Diagram shows code No. 12.
DTC 83-1 says “No VSP Signal”, DTC 83-1 also says ” PCM Com Error” The manual says to erase the DTC and then drive vehicle for 7 to 10 miles While checking the TPMS data list for proper vehicle speed on a scanner If correct speed then system is okay at this time. If not then it goes into how to troubleshoot the Can Bus lines
What are the code 61-1 and 62-1?
The car is in great shape, but two codes showed up that left the mechanic scratching his head: 61-1 and 62-1. Since your post is about the only one I see talking about possible solutions for these, I thought I’d send you a message. Can you report what you found and what solutions there are to resolve the issue (s)?