What causes the p0017 OBD-II trouble code?
What causes the P0017 code? The valve timing is out of position from a timing chain jumped out of position. There are oil flow problems to the phaser from incorrect oil viscosity or partly clogged passages. The oil control valve (OCV) has a restriction in the OCV filter.
What does the DTC code p0017 stand for?
Code P0017 means that your car’s powertrain control module detects a misalignment between the crankshaft and camshaft positions. What Does the P0017 Code Mean? Diagnostic trouble code (DTC) P0017 stands for “Camshaft Position B – Camshaft Position Correlation (Bank 1).”
What causes a crankshaft to be in p0017 position?
To sum things up, the common causes for code P0017 are as follows: 1 A faulty cam or crank sensor 2 The cam or crank circuit is open or shorted 3 The timing belt/chain is out of time 4 The cam or crank tone ring is slipped/broken 5 A problem in the VVT system 6 The PCM is faulty
Where is the p0016 sensor located on a PCM?
Should the timing be off, the PCM will set a code P0016. This code stands for Crankshaft Position – Camshaft Position Correlation (Bank 1 Sensor A). Where is the P0016 sensor located?
What does the OBD code p0017 mean?
What the P0017 code means. P0017 is the OBD-II generic code indicating that the crankshaft and camshaft position sensor for bank 1 exhaust camshaft do not correlate signals with each other.
To sum things up, the common causes for code P0017 are as follows: 1 A faulty cam or crank sensor 2 The cam or crank circuit is open or shorted 3 The timing belt/chain is out of time 4 The cam or crank tone ring is slipped/broken 5 A problem in the VVT system 6 The PCM is faulty
What is the p00xx code for the camshaft?
The ECM/PCM detects any out-of-time situation regarding the crankshaft and camshaft (greater than 9 degrees on a GM) and sets the P00xx codes listed above. Technicians will use an oscilloscope to examine the crank and cam sensor pattern the ECM/PCM is reading while the engine is running.
What happens if the VVT solenoid stops working?
If the VVT solenoid stops working, the whole system may be compromised, in which may result in intake and exhaust valves opening and closing at the wrong time. This in turn can cause a drastic reduction in how many miles you can travel per gallon of fuel.