What causes a Mercury Mariner to not start?

What causes a Mercury Mariner to not start?

While there are a variety of reasons your Mercury Mariner won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter. How is a no-start diagnosis fixed?

Where is the starter relay on a Mercury Mariner?

Ford uses an antitheft system to tell the PCM to energize a starter relay located in the battery Junction box. The image shown here is from a 2008 Ford Escape, Mercury Mariner. So your first job is to find out whether the no start problem is due to a bad relay or some other component or wiring harness.

What’s the junction box on a 2008 Mercury Mariner?

2008 Ford Escape Junction box which is similar to 2008 Mercury Mariner. Ford uses an antitheft system to tell the PCM to energize a starter relay located in the battery Junction box. The image shown here is from a 2008 Ford Escape, Mercury Mariner.

What kind of car is Mercury Mariner Premier?

Alright people, try to help me out here…my girlfriend owns a 2008 Mercury Mariner Premier with a V6 engine…had to add that my girlfriend owns it because I would never own a vehicle made by ford due to it’s poor reliability, but anyway, she’s owned the vehicle for a little over a year, has 19,000 miles on it, and is having problems.

While there are a variety of reasons your Mercury Mariner won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter. How is a no-start diagnosis fixed?

Where are the fuse panels on a Mercury Mariner?

Here you will find fuse box diagrams of Mercury Mariner 2005, 2006 and 2007, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

What happens when the starter fails to start?

Starter motor failure produces one common symptom across all makes and models: When you turn the key, the starter solenoid will click, but the engine will not rotate. You also Read More When the computer senses the engine is out of time, it will turn on the check engine light. The engine may stall or even just fail to start.

What to do when your car key wont work?

It works mostly in models of Volkswagen, Mercedes-Benz, and BMW and is applicable even when the key fob is damaged or has a dead battery. In case if you are driving a Honda Accord, the trick needs a bit of modification. After inserting the key into the driver’s door lock, turn the key to unlock, lock and then lock position again.

What causes the steering wheel to lock after turning off the car?

This annoying problem is mostly exclusive to Hondas. It mainly happens when you move the steering wheel after turning off the car. It locks the wheel in that position and does not let you move it next time you try to switch on the car.

What happens when the ignition lock cylinder fails?

When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it’s… Read More

What to do if your Mercury Mountaineer won’t start?

If your Mountaineer still will not start, and the flashing red light begins blinking rapidly when you attempt to start it, something is obviously malfunctioning. Either have the key reprogrammed or have more extensive troubleshooting and repairs done to the P.A.T.S. system by a certified technician.

How to reset an anti theft system for a Mercury Mountaineer?

At that time, the little red light should return to blinking at the slower, passive rate. If, once again, the Mountaineer fails to start, continue to Step 3. Raise the hood and use the battery terminal wrench, or a standard box wrench, to remove the negative battery cable. Wait 15 minutes before reconnecting the cable, then repeat Step 1.

When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it’s… Read More

Ford uses an antitheft system to tell the PCM to energize a starter relay located in the battery Junction box. The image shown here is from a 2008 Ford Escape, Mercury Mariner. So your first job is to find out whether the no start problem is due to a bad relay or some other component or wiring harness.

2008 Ford Escape Junction box which is similar to 2008 Mercury Mariner. Ford uses an antitheft system to tell the PCM to energize a starter relay located in the battery Junction box. The image shown here is from a 2008 Ford Escape, Mercury Mariner.

Alright people, try to help me out here…my girlfriend owns a 2008 Mercury Mariner Premier with a V6 engine…had to add that my girlfriend owns it because I would never own a vehicle made by ford due to it’s poor reliability, but anyway, she’s owned the vehicle for a little over a year, has 19,000 miles on it, and is having problems.

Why does my Mercury Mariner engine keep buzzing?

Turned the ignition off (no buzzing) turned the ignition on and started the engine-buzzing sounded again. I,brought the vehicle to the dealership were I purchased it from. The technician listened to it and said it is the fuel pump.

Where can I find a 12V test light for my Mercury Mariner?

You can find a 12V test light at your local Harbor Freight or Auto Parts store. Everybody is asking for help trouble shooting a no start condition. Reference to help from Ricks Free Auto Repair Advice. My Mercury Mariner 2010 had starting problems on and off. It turned out to be a faulty INERTIA SWITCH.

Why is my mercury 115hp boat not starting?

Normally it was turning over about 3-4 cranks per second (just making a rough guess). The motor and boat are both in really excellent condition and the cable “looks” to be like new on both ends. Not sure if it has a problem in between. It sounds like you guys are thinking its the starter motor gone bad.

Is it possible to fix a Mercury engine that won’t start?

The answer is “yes” to all of your suggestions. The solution is to take a logical troubleshooting approach and not just throw parts at the issue hoping to get lucky. Here are some hints: 1) Measure the battery voltage. Then measure it again while trying to start the engine.

How much does it cost to fix a Mercury Mariner?

1 Engine Loses Power 2010 Mariner Average Cost to Fix: $500 Average Mileage: 62,000 mi 2 Transmission Failure 2010 Mariner Average Cost to Fix: $3,100 Average Mileage: 111,000 mi 3 Shaking At Stop 2010 Mariner

When does a Mercury Mountaineer start stall idle?

Amazing I have a 2002 Mountaineer V8 with the same issue, started 3 yrs ago. Mercury/Ford claims they have never seen this before. Mainly stalls when car comes to a stop sign in the mornings, never had a high speed stall. I have replaced fuel filter and air control valve.

When did the dpfe sensor go away on the Mercury Mountaineer?

We took the Mountaineer to another dealer and they replaced the DPFE sensor in July of 07. Until then to now the problem went away.

Are there any problems with the Mercury Mariner?

Check out our Mercury Mariner overview to see the most problematic years, worst problems and most recently reported complaints with the Mariner.

You can find a 12V test light at your local Harbor Freight or Auto Parts store. Everybody is asking for help trouble shooting a no start condition. Reference to help from Ricks Free Auto Repair Advice. My Mercury Mariner 2010 had starting problems on and off. It turned out to be a faulty INERTIA SWITCH.