What causes a car to have a p0760 code?
There are at least seven fairly common reasons a vehicle may store a P0760 code: * Hydraulic blockages obstructing the fluid passages inside the internal terminal * A defective shift solenoid * Low transmission fluid * Internal transmission failures * Transmission fluid that is dirty or contaminated * Low levels of transmission fluid * A broken PCM
What does the p0011 Hyundai engine code mean?
Valve Timing Control (VTC) harness is open or shorted circuit. Valve Timing Control (VTC) circuit poor electrical connector Incorrect timing Engine mechanical problems Damaged Engine Control Module (ECM) What does this mean? First diagnose P0011 HYUNDAI code Check the “Possible Causes” listed above.
What’s the value of a 2008 Hyundai Elantra?
As a general guide, the trade-in value of a 2008 Hyundai Elantra with no options and driven roughly 12,000 miles per year would be worth about $1,934 for one in “Clean” condition and about $3,083 if you were selling it as a private party.
How to test diagnostic trouble code p0765?
The check engine light (CEL) will be lit. P0765: Under-Drive (UD) Solenoid Circuit Malfunction (OBD II equipped only). P0765: Shift Solenoid D Malfunction (OBD II equipped only).
There are at least seven fairly common reasons a vehicle may store a P0760 code: * Hydraulic blockages obstructing the fluid passages inside the internal terminal * A defective shift solenoid * Low transmission fluid * Internal transmission failures * Transmission fluid that is dirty or contaminated * Low levels of transmission fluid * A broken PCM
The check engine light (CEL) will be lit. P0765: Under-Drive (UD) Solenoid Circuit Malfunction (OBD II equipped only). P0765: Shift Solenoid D Malfunction (OBD II equipped only).
What are the trouble codes for the C solenoid?
The trouble codes related to this, the “C” solenoid, are codes P0760, P0761, P0762, P0763 and P0764 based on the specific malfunction that alerts the PCM to set the code and illuminate the Check Engine Light. These codes will also be associated to the A, B or C solenoid circuit.
What does the code p0765 mean on a shift solenoid?
If the code returns, the mechanic has diagnosed an issue within the shift solenoid system, and can move on to other repairs. The most commonly reported misdiagnosis with the P0765 code is immediately replacing the shift solenoid D, rather than considering that the shift solenoid circuit is at fault.
How much does it cost to diagnose a p0765 code?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost to diagnose the P0765 code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
What is the PCM error code for Shift Solenoid D?
When the PCM determines a malfunction in the Shift Solenoid “D” Shift Circuit, various codes may be triggered depending on the vehicle, transmission, and the number of gears inside the automatic transmission. In Error Code P0765, the error is associated with the general malfunction of the transmission Shift Solenoid “D” circuit.