What car came with the B16A2?
yeah, the jdm crxs and civics came with b16a’s, but not b16a2’s. so its either he has a obd-2 b16a2 from a 99-00 civic si, or he has an obd1 jdm b16a from japan that would require a jumper harness.
How much horsepower does a B16A2 have?
B16A2 – here camshafts with the following specifications were used: duration (at . 050″ or 1 mm lift) 224/220 deg, lift 10.47/9.6 mm. The compression ratio was 10.2, the power was 160 HP @ 7,600 rpm, and the torque was 150 Nm @ 6,500 rpm.
How much power can a stock b16a2 handle?
But it depends on what turbo you will be using. stock b16’s have been good up to over 300hp but the majority of the time they don’t last very long. On a stock b16 i wouldn’t shoot for over 260hp. tune it well.
How many liters is a B20 engine?
| Honda B engine | |
|---|---|
| Displacement | 1.6–2.0 L; 97.3–120.4 cu in (1,595–1,973 cc) |
| Cylinder bore | 81 mm (3.19 in) 84 mm (3.31 in) |
| Piston stroke | 77.4 mm (3.05 in) 81.4 mm (3.20 in) 87.2 mm (3.43 in) 89 mm (3.5 in) |
| Valvetrain | DOHC with VTEC (in some models) |
Which B16 is the best?
The B16B is the most desirable of all B16 engines and was a revised and improved equivalent of the earlier B16A SiR 2nd Gen. For this, they opted for a de-stroked equivalent of the Integra Type-R B18 engine, which provided a new height of 212.4mm.
How much horsepower can a stock b16 take?
there have been quite a few threads on this before, search button works great. But it depends on what turbo you will be using. stock b16’s have been good up to over 300hp but the majority of the time they don’t last very long. On a stock b16 i wouldn’t shoot for over 260hp. tune it well.
What was the power of a Honda B16A?
B16A6 was an analogue for B16A2 Honda Civic for the countries of Middle East and South Africa. The power was 160 HP @ 7,800 rpm; and the torque was 150 Nm @ 6,400 rpm. 8. B16B was top version of B16. This engine was developed based on B16A SiR II, which was also quite powerful, but B16B was a new level.
Where can I find a JDM B16A engine?
B16A ENGINE | USED JDM ENGINE INC. We have more items available in inventory. Please contact us for up to date stock information.
What kind of exhaust system does a B16A have?
You just have to regularly and with good quality perform maintenance of your B16A or B16B, and they will run a bit longer. The best mods for a regular B16A are a cold air intake system, B18C 98 Spec R 4-1 exhaust manifold (or another 4-1 manifold) and a 2.5 exhaust system. This will give you up to 180 HP.
What is the compression ratio for a Honda Civic B16A2?
B16A2 – here camshafts with the following specifications were used: duration (at .050″ or 1 mm lift) 224/220 deg, lift 10.47/9.6 mm. The compression ratio was 10.2, the power was 160 HP @ 7,600 rpm, and the torque was 150 Nm @ 6,500 rpm. This version was installed in Honda Civic VTi, Civic SiR, and Del Sol VTi. 5.
B16A6 was an analogue for B16A2 Honda Civic for the countries of Middle East and South Africa. The power was 160 HP @ 7,800 rpm; and the torque was 150 Nm @ 6,400 rpm. 8. B16B was top version of B16. This engine was developed based on B16A SiR II, which was also quite powerful, but B16B was a new level.
You just have to regularly and with good quality perform maintenance of your B16A or B16B, and they will run a bit longer. The best mods for a regular B16A are a cold air intake system, B18C 98 Spec R 4-1 exhaust manifold (or another 4-1 manifold) and a 2.5 exhaust system. This will give you up to 180 HP.
B16A ENGINE | USED JDM ENGINE INC. We have more items available in inventory. Please contact us for up to date stock information.
What’s the difference between a B16 and B16B?
There are a few different variants of the B16, but they are all mostly the same except for the B16B. The B16B is special because it does not use the normal B16 bottom end. Instead, it uses a de-stroked B18 bottom end which gives it a slightly different rod length and crankshaft throw. The B16B is also the most popular, outputting 187 horsepower.