What can happen if you are driving a car with faulty spiral cable?
What can happen if you are driving a car with a faulty spiral cable and defective airbags. I ask because I lost control of my car and had an accident and I need to know if the spiral cable could have been the cause. have the same problem? I assume you are referring to the wound-up ribbon cable inside the clock spring assembly.
What to do if your network cable is not properly plugged in?
You can power cycle your computer to refresh the network connection to fix the network cable error. For a laptop user: Step 1: Unplug the charger of your laptop, turn it off, and remove the battery. Step 2: Keep the power button pressed for at least 30 seconds and wait 10 minutes.
What happens when the clock spring cable breaks?
I assume you are referring to the wound-up ribbon cable inside the clock spring assembly. Those typically break on one end, then the air bag computer will detect the open circuit to the steering wheel air bag, set a diagnostic fault code, then turn on the red warning light. In some cases the ribbon cable becomes shredded and torn apart.
What happens when a ribbon cable is unraveled?
When the ribbon cable is that badly unraveled, the two wires involved are typically shorted together. Any static charge applied would be applied to both wires equally, so the difference between them is 0 volts. I have never heard of a clock spring being so bound up that the steering wheel could not be turned.
Can I avoid replacing my failing clockspring ( spiral cable?
I’m going to guess it’s much more likely your clockspring (spiral cable) has failed, and much less likely that the button switch contacts are dirty. Find someone younger than you who is willing to install it. It takes less than a half hour — the second time you do it. You can buy the part online for about $60.
What can happen if you are driving a car with a faulty spiral cable and defective airbags. I ask because I lost control of my car and had an accident and I need to know if the spiral cable could have been the cause. have the same problem? I assume you are referring to the wound-up ribbon cable inside the clock spring assembly.
You can power cycle your computer to refresh the network connection to fix the network cable error. For a laptop user: Step 1: Unplug the charger of your laptop, turn it off, and remove the battery. Step 2: Keep the power button pressed for at least 30 seconds and wait 10 minutes.
What do I do if my Ethernet cable is unplugged?
Connect the cable and battery to your computer, and turn it on. Don’t connect the Ethernet cable yet. Step 7. Right-click on Wi-Fi or network adapter icon and select Open Network and Internet Settings. Step 8. Go to Change adapter options under Related settings. Step 9. Right-click on your Ethernet connection and select Enable. Step 10.