What are the sensitivity settings of an ups?
It is generally 2-4 milliseconds. Medium Sensitivity Mode. In the event of a RMS voltage-out-of-tolerance(High/Low/No) and RMS-rate-of-change disturbances(dv/dt) in the line voltage, the UPS will transfer to battery power and watch the AC line until it can transfer back to line.
What’s the difference between basic EPS and diluted EPS?
Diluted EPS is a performance metric used to assess a company’s earnings per share (EPS) if all convertible securities were realized. Basic earnings per share (EPS) tells investors how much of a firm’s net income was allotted to each share of common stock.
How to change the sensitivity of a pen?
Use a pointed object (such as a pen) to do so. The default setting is “high”; press the button once to set the sensitivity to “medium”, and press it again to set it to “low”; pressing it a third time will set it back to “high”. The sensitivity setting change will take effect immediately.
How does electric power steering ( EPS ) work?
The EPS control module also receives a vehicle speed input that, in combination with the steering position and torque sensors, combine to produce steering feedback to the driver. The position and torque sensors might also provide an electric input to safety-related systems like the vehicle stability control system (VSC), if so equipped.
What’s the difference between EPs and contrast sensitivity?
In another definition for EPS, is the contrast sensitivity 2-2T which is 2% of the thickness of the material with a hole diameter of two times the plate thickness (2T) is just discernible in the radiograph [12].
What’s the pressure on an eps10 alarm switch?
The EPS10 Series features field adjustable pressure sensitivity to provide an alarm response between 4 and 20 psi. It is factory set to respond at 4 – 8 psi on rising or falling pressure. The pressure adjustment wheel requires no special tools and does not affect switch synchronization on the EPS10-2. The EPS10 Series switches are NEMA 4 rated.
It is generally 2-4 milliseconds. Medium Sensitivity Mode. In the event of a RMS voltage-out-of-tolerance(High/Low/No) and RMS-rate-of-change disturbances(dv/dt) in the line voltage, the UPS will transfer to battery power and watch the AC line until it can transfer back to line.
What does an electromechanical assist ( EPs ) Do?
The electromechanical assist is usually a directionally controlled, pulse-modulated electric motor that is geared into the steering shaft. The torque sensor signal inputs are displayed as positive and negative voltages, as are the steering position sensor input voltages.