What are the problems with a 2004 Hyundai Elantra?
1 Squealing Noise When Starting Up 2004 Elantra Average Cost to Fix: N/A Average Mileage: 95,000 mi 2 Paint Coming Off 2004 Elantra Average Cost to Fix: N/A Average Mileage: 50,000 mi 3 Oil Pump Failure 2004 Elantra
What does it mean when your Hyundai Elantra won’t start?
This just means that the engine doesn’t move when you turn the key. The second way that your Elantra won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own. When the engine isn’t turning over at all, that’s a bit easier to diagnose than when it is cranking but not firing.
What kind of reliability does the Hyundai Elantra have?
RepairPal gives the Elantra a score of 4.5 out of 5.0, ranking it 8th out of 36 compact car models. While the earliest generations showed average fuel economy, the later model years grew more fuel efficient with each new generation. The Hyundai Elantra has earned good scores on all major reliability ratings.
Are there any recalls on 2011 Hyundai Elantra?
In 2015, Hyundai issued a recall for certain 2011 Hyundai Elantra units. The affected vehicles’ front coil springs were vulnerable to corrosion caused by exposure to road salt. A rusty coil spring could fracture and puncture the nearby tire, putting the vehicle’s safety at risk.
How to fix a Hyundai Elantra ( cranks but wont start )?
HOW TO FIX A HYUNDAI ELANTRA (CRANKS, BUT WONT START!) SOLVED!!! – YouTube HOW TO FIX A HYUNDAI ELANTRA (CRANKS, BUT WONT START!) SOLVED!!! If playback doesn’t begin shortly, try restarting your device.
Why was the Hyundai Elantra dropped in Australia?
The Elantra hybrid comes with an “Eco Guide” tree icon meant to coach the driver into developing more eco driving habits. The CVT has an optional “E (Eco-Drive)” gear to maximize fuel efficiency. The LPG Hybrid was dropped in Australia due to lack of demand, increase in emphasis on brand image and change in focus to cleaner diesel engines.
When did the Hyundai Elantra start having airbags?
Starting in 2001, all American models came with standard front and front-side airbags, air conditioning, power locks, power windows and power steering. This simplified dealer inventories and repairs and also sought to improve Hyundai’s image of “value” cars.
Are there any problems with the Hyundai Elantra?
Check out our Hyundai Elantra overview to see the most problematic years, worst problems and most recently reported complaints with the Elantra.
When did the Hyundai Elantra come out in Europe?
Hyundai Lantra GLS (Portugal) Launched in October 1990, the Elantra (codename J1) received a mid-term facelift in 1993. It was sold in Europe from the spring of 1991. It replaced the somewhat larger on the outside Stellar, although that model had not been offered in many markets.
Which is longer Hyundai Elantra or Hyundai Langdong?
Elantra Langdong (朗動) is a longer version of Elantra for the Chinese market. Released in August 2012, the Langdong sedan is 4 cm (1.6 in) longer and 1 cm (0.39 in) wider than the Elantra sold in other markets.
When did the Hyundai Elantra Lingdong PHEV come out?
Hyundai Elantra (Lingdong) PHEV version is officially launched in China in August 2019 and produced by Beijing Hyundai, a joint venture by BAIC and Hyundai. The Elantra Lingdong PHEV features a restyled front bumper, and is powered by a 1.6 liter engine producing 105 ps plus motor combination power system.
Why is my Hyundai Elantra stalling at 35 mph?
The contact owns a 2007 Hyundai Elantra. The vehicle was taken to the dealer several times for stalling while driving between speeds of 35 to 40 mph. The dealer replaced the spark plugs wires, and the cylinder. The repair did not correct the failure.
What kind of transmission does a Hyundai Elantra have?
2011 hyudai Elantra with 800 miles on it. Transmission violently bucks at highway speeds and then shifts to neutral. There is suddenly no throttle response at speeds exceeding 60 mph requiring the car to be coasted to safety if possible.
When does Hyundai Elantra shift to 1st gear?
The contact stated when driving 65 mph the vehicle will shift on it’s own to 1st gear, and sometimes the vehicle will stay in 1st gear. The driver stated the vehicle will also shift it’s self into neutral and the vehicle will also begin to accelerate on it’s own.
Where is the cylinder 4 on a Hyundai Elantra?
An important thing to understand when finding the location of Cylinder 4 is that it’s going to be the 4’th cylinder in the firing order of the vehicle, and not the 4’th cylinder that you might see when looking at the engine. Elantra P0304 OBDII Code Symptoms The P0304 trouble code will trigger the Elantra’s service engine soon light.
Why does my Elantra have a cylinder 4 misfire code?
The engine is also not firing all of the fuel, so raw fuel is also passing through Cylinder 4 into the exhaust. Mileage may suffer as well when your Elantra has P0304 as well. P0304 is a cylinder specific misfire code, which means that Cylinder 4 is misfiring and causing the code.
An important thing to understand when finding the location of Cylinder 4 is that it’s going to be the 4’th cylinder in the firing order of the vehicle, and not the 4’th cylinder that you might see when looking at the engine. Elantra P0304 OBDII Code Symptoms The P0304 trouble code will trigger the Elantra’s service engine soon light.
Is there a problem with the Hyundai Elantra p0304?
P0304 is certainly a cause for concern, and should be considered a threat to the drivability your Elantra. The nice thing about P0304 is that it’s a cylinder specific trouble code, which makes diagnosing the problems simpler than P0300, which means that the cylinders are randomly misfiring.
What is the misfire code on Hyundai Elantra?
Hyundai Elantra P0304 Definition. P0304 is a cylinder specific misfire code, which means that Cylinder 4 is misfiring and causing the code.
What does OBD2 stand for on Hyundai Elantra?
It’s and OBD2 code and stands for: P0304 is certainly a cause for concern, and should be considered a threat to the drivability your Elantra. The nice thing about P0304 is that it’s a cylinder specific trouble code, which makes diagnosing the problems simpler than P0300, which means that the cylinders are randomly misfiring.