What are the different types of ABS fault codes?
Dynamic Wheel Speed Sensor Fault. Dynamic Wheel Speed Sensor Fault. Dynamic Wheel Speed Sensor Fault. Verify correct tire size as desired. Verify proper tire inflation. Verify correct number of excitering teeth. Verify correct ABS configuration using blink codes or other diagnostic tools.
What are the codes for the ABS sensor?
OPEN OR SHORT CIRCUIT 01 Red channel wheel speed sensor wiring S1A Indicates a wheel speed sensor or its wiring has 02 Red channel wheel speed sensor wiring S1B a short or open circuit. Disconnect the relevant 03 Blue channel wheel speed sensor wiring S2A sensor and measure the resistance between the
What is the DTC code for abs-25?
ABS-25 ABS (DIAGNOSTICS) LIST OF DIAGNOSTIC TROUBLE CODE (DTC) 21 4A02 Open or short circuit in Front ABS wheel speed sensor RH cir-cuit Open or short circuit in Front ABS wheel speed sensor RH cir-cuit <Ref. to ABS-85, DTC 21 Ñ OPEN OR SHORT CIR-CUIT IN FRONT RIGHT ABS WHEEL SPEED SENSOR CIRCUIT Ñ , Diagnostics Procedure with Subaru Select
Can a low voltage cause an OBD1 code?
Low voltage can cause a lot of trouble with the troubleshooting and many error codes that we do not want. Put a jumper wire between PIN A and PIN B. Let the jumper wire sit there and turn the ignition to ON. Do not start the engine. The check engine light will begin to flash. Count the flashes.
What are the codes for an ABS warning light?
If after testing the sensor or if you have scanned the ABS computer and get a trouble code C0035, C0040, C0041, C0045, C0046, C0050, C0051, C1221, C1222, C1223, C1224, C1225, C1226, C1227, C1228 , C1232, C1233, C1234 or C1235 the sensor is either unplugged or it has shorted out and needs replacement.
Dynamic Wheel Speed Sensor Fault. Dynamic Wheel Speed Sensor Fault. Dynamic Wheel Speed Sensor Fault. Verify correct tire size as desired. Verify proper tire inflation. Verify correct number of excitering teeth. Verify correct ABS configuration using blink codes or other diagnostic tools.
What do the trouble codes on GM ABS mean?
The ABS light will flash the trouble codes 3 times each and then repeat them. Here is a list of the GM trouble codes, and what they mean. Codes 12 and 14 aren’t trouble codes, but may appear to indicate normal operation. 21 – right front speed sensor or circuit open. 22 – missing right front speed signal. 23 – erratic right front speed signal.
What is the diagnostic code for Bendix ABS?
If needed, reset to the default ABS configuration and power-up to initiate auto-configuration. Power supply diagnostic trouble code. Power supply diagnostic trouble code. Power supply diagnostic trouble code. Clear faults. If faults return, replace the TABS-6 Module. Clear faults. If faults return, replace the TABS-6 Module.