What are the color of the runway markings?
Markings for runways are white. Markings defining the landing area on a heliport are also white except for hospital heliports which use a red “H” on a white cross. Markings for taxiways, areas not intended for use by aircraft (closed and hazardous areas), and holding positions (even if they are on a runway) are yellow.
When visibility is less than refueling and explosive loaded vehicles Cannot be operated unless directed by the wing commander?
A) When visibility is less than 300 ft, refueling and explosive loaded (laden) vehicles will not be operated unless directed by the wing or installation commander.
When an aircraft’s engines being operated vehicles Cannot be parked less than of the aircraft?
Airfield Driving
| Question | Answer |
|---|---|
| When a n aircrafts engines are being operated, vehicles will not be parked less than ____/____ of an aircraft | 25 Ft in front / 200 fr rear |
| A flashing red light from the control tower means___ | Clear active runway |
Where are your blind spots located?
Simply put, a blind spot is any area where someone’s view is obstructed. When you’re in the driver’s seat of your car, blind spots include areas of the road you can’t see by looking in front of you, in your rear-view mirror, or in either of your side-view mirrors.
What do the white lines on an airfield mean?
____Are the portion of the airfield where aircraft or helicopters are parked before, after, or between flights, and for servicing and maintenance. ___ are routes marked with solid white lines on the edges and a dashed white center line.
What do the white lines on the road mean?
Solid white lines are also used to mark the edge of the road. Dashed or broken yellow line. Broken yellow lines are painted just before a solid yellow line. They are also called no-overtaking advance warning lines and they indicate to drivers who are overtaking that they should move back to the left.
What do the lines on the airfield flashcards mean?
Routes marked with solid white lines on the edges and a dashed white center line. Identified by a solid red line used to identify the boundary. Do not cross or break red under any circumstance. These markings are two solid yellow lines and two double dash lines that run across the width of the taxiway from edge to edge.
What does a solid white line at an intersection mean?
Intersections are sometimes marked with a solid white line. The Road Code says you are not permitted to overtake at an intersection. There are some exceptions to this in section 2.7 of the Land Transport (Road User) Rule 2004. Solid white lines are also used to mark the edge of the road.
____ are the portion of the airfield where aircraft or helicopters are parked before, after or between flights, and for servicing and maintenance. ______ are routes marked with solid white lines on the edges and a dashed white center line.
Routes marked with solid white lines on the edges and a dashed white center line. Identified by a solid red line used to identify the boundary. Do not cross or break red under any circumstance. These markings are two solid yellow lines and two double dash lines that run across the width of the taxiway from edge to edge.
What do white lines mean on a highway?
B. Mark the middle of the highway. White lines separate lanes of traffic going in the same direction. A white line also marks the right edge of the highway. A. Can be crossed to change lanes
What do the yellow lines on a Travis taxiway mean?
Do not cross or break red under any circumstance. These markings are two solid yellow lines and two double dash lines that run across the width of the taxiway from edge to edge. A minimum of 100 from edge. What does ‘Hold Short’ mean?