Is there an air bag warning light on my Miata?
So disconnect the gray socket from the blue airbag diagnostic module….get a medium sized zip tie, cut it to about 6 inches and insert it into both holes of the connector (by looping it) where the earlier mentioned plastic blades would be…and eureka! No airbag light, no audible tone, no blinking, and best of all, no airbag in my face!
Is there code 12 Flashing on my Miata 94?
In reply to a post by Jim Hodgkiss Hi,I have a 94 and I think it is a code 12 flashing. Sponsored Links. Become a Supporting Member to hide this ad & support a small business
What should I do if my airbag light keeps flashing?
Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy! – YouTube
What makes the air bag warning light blink?
I decided to try it as my 24-year old Miata was experiencing the dreaded Miata “Flashing Airbag Light”! After searching and searching about what makes my airbag light blink 5 times, then escalate to 10 times, I came to this solution to shut it down without ANY audible alarms or having to pull the bulb.
So disconnect the gray socket from the blue airbag diagnostic module….get a medium sized zip tie, cut it to about 6 inches and insert it into both holes of the connector (by looping it) where the earlier mentioned plastic blades would be…and eureka! No airbag light, no audible tone, no blinking, and best of all, no airbag in my face!
In reply to a post by Jim Hodgkiss Hi,I have a 94 and I think it is a code 12 flashing. Sponsored Links. Become a Supporting Member to hide this ad & support a small business
Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy! – YouTube
I decided to try it as my 24-year old Miata was experiencing the dreaded Miata “Flashing Airbag Light”! After searching and searching about what makes my airbag light blink 5 times, then escalate to 10 times, I came to this solution to shut it down without ANY audible alarms or having to pull the bulb.
Why does my airbag light flash on and off?
After continued use, the thin circuit bands that make up your airbag clock spring may become brittle or worn out. This leads to a sporadic connection of your driver’s airbag. If this is the case, the system will send a code to your computer and the airbag light will turn on or flash.
How do you reset an airbag warning light?
Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. A no cost easy way to reset and fix your airbag SRS warning light.
What does it mean when the airbag light is flashing?
A flashing airbag warning light indicates a significant problem with the SRS system meaning you should take it to a repairer immediately. If the light stays on, you should still take it to repairer, however, there are a few things you can try first that could rectify the problem.
What does a flashing airbag light mean?
A flashing airbag light can mean one of two things. The first possibility is that your battery is in death row. Have it tested at your local parts store. The second possibility is that there is an actual problem with the airbag system.
Why is my airbag light blinking?
One of the possible and more common reasons to make your airbag light flash is depletion of the battery backup of your airbag. This could be caused by the recent draining of the car battery.
When does the air bag light stop flashing?
The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy!
The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy!
Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. A no cost easy way to reset and fix your airbag SRS warning light.
How long does it take for airbag light to stop flashing?
Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset.
Why is the airbag light flashing on my 1993 Miata?
I’m considering purchasing a 1993 Miata. The airbag light is flashing. Current owner says that once the battery went completely dead (lights were left on). They replaced the battery & the airbag light bagan flashing…???
How big are the air bags on a Miata?
Hey, Steve….they are just a standard zip tie, readily available at any hardware store. They measure 3/16″ wide by 8″ long. Here is a link: Best of luck to you, it’s pretty straightforward and easy to do….the hard part is crawling under the dash!
Where is the air bag diagnostic module on a Mazda Miata?
The module is a little blue package that lives up near the steering wheel on the 1990-1993 Miatas. This part wasn’t used in the entire range of the first generation’s production due to revisions that happened along the way.
Why is there a flashing light on my air bag?
My ’92 managed to pass the dreaded annual safety inspection in Massachusetts after the ziptie fix was put into service. The flashing light was quite a nuisance. Probably a stupid question, but I assume (yeah I know about assuming) the airbag will not deploy unless I reconnect it back to original?
My ’92 managed to pass the dreaded annual safety inspection in Massachusetts after the ziptie fix was put into service. The flashing light was quite a nuisance. Probably a stupid question, but I assume (yeah I know about assuming) the airbag will not deploy unless I reconnect it back to original?
What should I do if I Lose my Miata?
If there is a collision, the Miata is going to lose. You might want to try to find out which airbag is causing trouble. If any passengers are likely to be small framed – children or shorter women, you might want the passenger side first generation airbag disabled anyway. Same for the driver side airbag if you are small framed.
What should I do about my 1991 Mazda Miata air bag?
1991 Mazda Miata Air Bag Diagnostic Computer Repair & System Down Fuse Replacement [Cars!] My friend recently purchased a 1991 Mazda Miata from its original owner, in immaculate condition and with incredibly low miles. Except for one issue: the Air Bag light on the instrument cluster was indicating a trouble code.
What kind of capacitor does a Mazda Miata air bag use?
This board uses 5 x 100uF 35V electrolytic capacitors and 3 x 10uF 35V capacitors, all rated at 105°C, along with an assortment of other components that aren’t subject to failure the same way. When replacing, you can use any voltage rating as long as it’s 35V or higher.
Where can I find the air bag light code?
You can read the number of flashes and it will give you a code (codes listed below for ford ranger and Mazda B3000). If your code is not listed, just google the year, make and model of your car along with “airbag light code” (ex. 2001 Mazda B3000 airbag light code).
What does a flashing air bag light mean?
The flashing means that there is a fault with the system. You can read the number of flashes and it will give you a code (codes listed below for ford ranger and Mazda B3000). If your code is not listed, just google the year, make and model of your car along with “airbag light code” (ex. 2001 Mazda B3000 airbag light code).
What to do if your airbag light is on?
However, it is best not to drive the car if the SRS light is on. Do not drive the vehicle if the airbag light / SRS light is on. Consider using an OBD2 scanner to reset it or take your car to a professional to take care of the matter. Bonus: ABS light on: Why?
Why does the airbag light come on when the battery is low?
The problem will be gone once the battery is fully recharged. However, the battery could still be on. You have to use a scan-tool and remove the soft-code error to switch it off. Low car battery could trigger the airbag light to turn on. The spring does the job of maintaining the continuity between the driver seat’s airbag and electrical wiring.
Why does my air bag light keep flashing?
If your code is not listed, just google the year, make and model of your car along with “airbag light code” (ex. 2001 Mazda B3000 airbag light code). In this case it was code 4-6 which is the drivers side seat-belt pretensioner circuit which is cause by the wire/clip under the seat coming loose or getting moisture in it.
What should I do if my airbag light is blinking?
You should take a look at your SRS airbag module first, as this is the most common way to fix the problem. You can purchase a scanning tool that will be able to detect any codes your vehicle has and the reason behind them. This can also be done at your local body shop. The next step would be to remove the unit from your vehicle.
If your code is not listed, just google the year, make and model of your car along with “airbag light code” (ex. 2001 Mazda B3000 airbag light code). In this case it was code 4-6 which is the drivers side seat-belt pretensioner circuit which is cause by the wire/clip under the seat coming loose or getting moisture in it.
You can read the number of flashes and it will give you a code (codes listed below for ford ranger and Mazda B3000). If your code is not listed, just google the year, make and model of your car along with “airbag light code” (ex. 2001 Mazda B3000 airbag light code).
If there is a collision, the Miata is going to lose. You might want to try to find out which airbag is causing trouble. If any passengers are likely to be small framed – children or shorter women, you might want the passenger side first generation airbag disabled anyway. Same for the driver side airbag if you are small framed.
Why does my Mazda SRS light keep coming on?
The light can switch on for reasons unrelated to any defect in the air bag safety system, or it may illuminate because of a genuine problem that should be corrected.
How do you turn off the airbag light?
The first step is to turn the ignition switch on, which will make the airbag light to come on. The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds.
Why does the airbag light stay on on a Mazda MX-5?
It’s when it stays on that indicates a problem. Your airbag light is part of your MX-5’s larger supplemental restraint system. It works in tandem with the system to protect you in the event of an accident. If all parts of this system are not working properly, it can cause the airbag light to come on.
What does the diagnostic warning light on the Mazda MX-5 mean?
Every time you start your Mazda MX-5, the computer system runs a self diagnostic check on all major systems. If any of these checks fail, you will see a diagnostic warning light on the dash for the corresponding system. When the airbag system fails this check, you’ll see the airbag light.