Is there a problem with the Yamaha Virago starter?
A lot of Yamaha Virago models have a problem with their starters. Especially the twin rear shock models. Hit the button and it sounds like a bunch of marbles are knocking around in your crankcase.
Can You welding the starter on a virago?
Yamaha does not recommend welding the starter ring gear because if the engine should backfire you could do serious damage to the case. I know that this method of repair worked for many club members, but if locking-in the ring gear was a design requirement, I’m sure that Yamaha would have avoided this flaw.
What is the repair number for a Virago 750?
However, if you are not mechanically inclined, do not attempt this repair. Adding three shims, part number 156-11563-00, in the starter nose will take up any wear caused by prolonged use while this symptom existed. The XV-700’s and 750’s require a different repair because they do not have the starter clutch.
What’s the best way to start a virago bike?
To start your Virago you: turn the choke on (cold starting only), make sure the bike is in neutral, turn the key to the on position, turn the kill switch to the on position, using one finger push the starter button. If your engine is tuned properly, it will start in less than three revolutions. DO NOT ROLL THE THROTTLE!!!!
A lot of Yamaha Virago models have a problem with their starters. Especially the twin rear shock models. Hit the button and it sounds like a bunch of marbles are knocking around in your crankcase.
Yamaha does not recommend welding the starter ring gear because if the engine should backfire you could do serious damage to the case. I know that this method of repair worked for many club members, but if locking-in the ring gear was a design requirement, I’m sure that Yamaha would have avoided this flaw.
However, if you are not mechanically inclined, do not attempt this repair. Adding three shims, part number 156-11563-00, in the starter nose will take up any wear caused by prolonged use while this symptom existed. The XV-700’s and 750’s require a different repair because they do not have the starter clutch.
To start your Virago you: turn the choke on (cold starting only), make sure the bike is in neutral, turn the key to the on position, turn the kill switch to the on position, using one finger push the starter button. If your engine is tuned properly, it will start in less than three revolutions. DO NOT ROLL THE THROTTLE!!!!
How does the Virago ignition system work on a motorcycle?
Before discussing the Virago Ignition Systems it is important to understand how the power to run it gets there. The power starts at the battery and then travels through the main fuse, the ignition switch, the ignition fuse in the fuse box, the engine stop switch, and on to the TCI, and coils.
Why does my Yamaha Virago bike keep stalling?
In worse cases, riders have experienced a stall when the bike cuts out completely. The likeliest factor responsible for the running problems is an unkept fuel system. Viragos bikes have been around for a long time.
Is the Yamaha Virago a good bike to buy?
It proved attractive to riders as it was easy to ride and offered decent performance. If you are looking for a trusty cruiser with laid-back behavior, the Virago is an attractive option. But you’re here because you’re wondering if these bikes have any common problems and, if so, how severe they are.
What are the symptoms of a faulty Yamaha Virago starter?
Symptoms of a faulty electrical starter on the Yamaha Virago motorcycle include: Typically, the engine should come to life immediately on pressing the starter. However, if the starter turns slowly and the bike cannot start promptly, something is wrong with the starter. II. Starter Makes a Clicking Noise:
In worse cases, riders have experienced a stall when the bike cuts out completely. The likeliest factor responsible for the running problems is an unkept fuel system. Viragos bikes have been around for a long time.
It proved attractive to riders as it was easy to ride and offered decent performance. If you are looking for a trusty cruiser with laid-back behavior, the Virago is an attractive option. But you’re here because you’re wondering if these bikes have any common problems and, if so, how severe they are.
Why does my Virago make a clicking noise?
Starter Makes a Clicking Noise: Some users report that Virago’s starter will emit a clicking sound but won’t turn over. Other weird noises that show starter problems include a grinding, whirring, or buzzing noise. III. Starter Slips and Doesn’t Turn the Engine:
Where is the compression spring on a Yamaha Virago?
Replace the idler gear compression spring, P/N 905-01156-36-00, and starter gear tension clip, P/N 904-68291-14-00. These parts are located inside the left side cover. Yamaha does not recommend welding the starter ring gear because if the engine should backfire you could do serious damage to the case.
Why does my Virago starter make a clicking noise?
A low battery can create all kinds of starting problems such as: The starter makes a rapid clicking noise when you push the starter button. (Low voltage will cause the starter relay not to engage the starter gear into the flywheel.) The starter clutch located inside the left side cover is the worn part.
A low battery can create all kinds of starting problems such as: The starter makes a rapid clicking noise when you push the starter button. (Low voltage will cause the starter relay not to engage the starter gear into the flywheel.) The starter clutch located inside the left side cover is the worn part.
Replace the idler gear compression spring, P/N 905-01156-36-00, and starter gear tension clip, P/N 904-68291-14-00. These parts are located inside the left side cover. Yamaha does not recommend welding the starter ring gear because if the engine should backfire you could do serious damage to the case.
Where is the starter clutch on a virago?
The starter clutch located inside the left side cover is the worn part. It is designed to protect the engine from backfiring, when starting. This part eventually wears out and is relatively easy to replace. However, if you are not mechanically inclined, do not attempt this repair.
What does it mean when your Virago doesn’t start?
Sometimes owners complain of intermittent starting problems. That is, the virago starter system works, then it doesn’t, then it does. Or it works when the engine is cold, but not when it is hot. Or you just hear “clicks”. This can mean that the system (actually the main starter relay) isn’t receiving its full voltage.
What’s the starter number on a Yamaha Virago 750?
Adding three shims, part number 156-11563-00, in the starter nose will take up any wear caused by prolonged use while this symptom existed. The XV-700’s and 750’s require a different repair because they do not have the starter clutch. Yamaha suggests changing the large tension clip, P/N 904-68291-06-00, on the idler gear.
What’s the price of a 1981 Yamaha Virago?
1981 Yamaha Virago 750 motorcycle for sale only $1,299! Runs strong, needs nothing just gas and go. Fun to ride, great gas mileage, cool looking all for only $1,299!! View Video Call (888)RIDE-990 for more information.
Why is my starter not working on my Virago?
In fairness to Yamaha, many starter problems are created by the owner. There are all types of repair designed by Virago owners. Those repairs along with suggestions from Yamaha are the subject of this report. First we have the symptoms. You know, those things that either happen or don’t happen when you hit the starter button.
Is the Yamaha Virago XV750 a good bike?
Selling my 1981 Yamaha Virago XV750. It runs good and the only problems I know of are small oil leak on the bottom side and a dent in the gas tank from when the tank fell off a shelf in the garage. This is a good bike I am only selling because I agreed to with my wife when I got a boat.