Is there a problem with the Mazda 3 Blind Spot Monitoring System?
Some problem with the system including the Blind Spot Monitoring (BSM) warning lights is detected. A large deviation in the installation position of a radar sensor (rear) on the vehicle has occurred. There is a large accumulation of snow or ice on the rear bumper near a radar sensor (rear). Remove any snow, ice or mud on the rear bumper.
Where is the radar sensor on a Mazda 3?
A large deviation in the installation position of a radar sensor (rear) on the vehicle has occurred. There is a large accumulation of snow or ice on the rear bumper near a radar sensor (rear). Remove any snow, ice or mud on the rear bumper. Driving on snow-covered roads for long periods.
Why does my Mazda have a BSM warning light?
– If the door window glass is tinted, it may affect the visibility of the BSM warning light, making it difficult to confirm the illumination of the light. The warning beep operates when the turn signal lever is operated to the side where the BSM warning light is illuminated.
How much electromagnetic radiation does a Mazda radar sensor emit?
– For repairs or paintwork around the radar sensors, or replacement of the bumper, consult an Authorized Mazda Dealer. This BSM (blind spot monitoring) device emits intentional electromagnetic radiation in the 24 GHz to 25 GHz frequency range. The total radiated average power over the entire bandwidth is below _14 dBm (40 µW).
Some problem with the system including the Blind Spot Monitoring (BSM) warning lights is detected. A large deviation in the installation position of a radar sensor (rear) on the vehicle has occurred. There is a large accumulation of snow or ice on the rear bumper near a radar sensor (rear). Remove any snow, ice or mud on the rear bumper.
A large deviation in the installation position of a radar sensor (rear) on the vehicle has occurred. There is a large accumulation of snow or ice on the rear bumper near a radar sensor (rear). Remove any snow, ice or mud on the rear bumper. Driving on snow-covered roads for long periods.
What happens when the Blind Spot Monitoring ( BSM ) off indicator light flashes?
In the following cases, the Blind Spot Monitoring (BSM) OFF indicator light flashes and operation of the system is stopped. If the Blind Spot Monitoring (BSM) OFF indicator light remains flashing, have the vehicle inspected at an Authorized Mazda Dealer as soon as possible.
When to replace the BSM control module in Mazda 3?
If the system does not operate normally even though the related wiring harness and short cord are normal, replace the BSM control module. Because this terminal is for communication, good/no good judgment by terminal voltage is not possible. Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.