Is it hard to remove Jeep doors?
Removing your Jeep’s doors is quite easy, but you’ll want to find a safe place to store them when you’re out driving in the open air.
What do I need to remove the doors on my Jeep Wrangler?
It’s also beneficial to lube the door stems and hinges when the doors are removed, in order to make future removal easier. If your Jeep is equipped with power windows, locks or mirrors, there will be a wire harness that will need to be unplugged.
How do you remove power windows from a Jeep Wrangler?
If your Jeep is equipped with power windows, locks or mirrors, there will be a wire harness that will need to be unplugged. Before unplugging the wire harness, lower the windows to ensure that the glass is properly protected within the door frame and to make removal easier.
Is the top of a Jeep Wrangler removable?
Jeep Wranglers are designed with removable body components, like the top and doors. In this tech guide we’ll discuss the procedures involved with removing the doors, storage solutions and tube door options available.
How do you remove wiring from a Jeep Cherokee?
Press the release on the plastic wire pigtail and pull it backward to disconnect the wiring. If your Jeep does not have power windows or door locks, you can skip this step. Be careful not to break the plastic clip that holds the wiring pigtail in place. Locate the two bolts holding the door on the vehicle.
How do you remove a front door on a Jeep Wrangler?
The hinge tells you: T50. Right here. The process is basically the same for the front and rear: Roll down the windows, remove the door check arm, unplug the wiring, drop the two hinge bolts, pull off the limit strap, and lift it free. It’s a simple process—but not entirely idiot-proof, as I discovered.
If your Jeep is equipped with power windows, locks or mirrors, there will be a wire harness that will need to be unplugged. Before unplugging the wire harness, lower the windows to ensure that the glass is properly protected within the door frame and to make removal easier.
How big of a socket do I need to take off a jeep door?
Use a 13 millimeter socket and wrench to remove these nuts. Use a six point socket rather than a twelve point socket to minimize how much the nut can move inside the socket.
Jeep Wranglers are designed with removable body components, like the top and doors. In this tech guide we’ll discuss the procedures involved with removing the doors, storage solutions and tube door options available.