Is 2001 Hayabusa fuel injected?
Yes, all years are fuel injected.
Is 2005 Hayabusa fuel injected?
The 2005 Suzuki Hayabusa sits on the impressive power plant of a 1,299cc liquid cooled inline four cylinder. The DOHC 16 valve, fuel injected delivery system ensures maximum control and throttle response.
How do you prime a fuel injected motorcycle?
Registered
- Fill the fuel tank.
- Turn Engine Stop switch OFF.
- Turn ignition key ON.
- Turn stop switch to RUN.
- Allow switch to remain in RUN position until pump. stops running (about 2-3 seconds).
- Turn stop switch OFF.
- WAIT until the PCM centers the IAC valve (the clicking.
- Repeat Steps 4-7 about 5 times to complete the.
Where to get Bosch fuel injectors for Hayabusa?
On my Velocity Stage 1 Turbo Hayabusa I upgraded the fuel injectors from the stock 24lb injectors to Bosch 30lb injectors purchased from Fuel Injector Connection this year. They are located in Cumming, GA and have a very cool website with videos showing how to Ohm test injectors as well as other injector info.
What does the nozzle look like on a Hayabusa?
On the older Hayabusa injectors there is a pintle style needle that allows the fuel to flow through one hole. On the new style Bosch injectors the nozzle looks like a small shower head with multiple holes.
What was the HP increase on a Hayabusa?
My guess is the injectors looked like a “Super Soaker” shooting into the throttle bodies as opposed to the atomized mist of C-16 they were supposed to be supplying to the cylinders. In the 10lb boost area this increased my HP from 277 to 288 HP and the injectors were only at 80% duty cycle. In the 6 lb range there was no change in HP.
Are there any other modifications to the Hayabusa?
Obviously, there are plenty of other modifications that can be performed on the Hayabusa. There is no doubt the biggest bang for the buck is slapping on an NOS fogger kit and picking up an extra 40 HP or more. Then there is always the route I took and coming off your wallet with 4K to add a turbo.
What kind of fuel injector does a Hayabusa use?
*The RCC Billet Fuel Rail ( p/n 84-41.1) is designed to use our injector kits 1-0737,1-0560 and 1-0590 in the secondary position on Gen 2 Hayabusas. This will allow all the fuel needed for turbo and dry nitrous applications up to 400 HP.
Which is fuel rail for GEN 2 Hayabusa?
The RCC Billet Fuel Rail ( p/n 84-41.1) is required to use our 62 lb injector kit in the secondary position on Gen 2 Hayabusas. The kit comes with everything necessary to install including new injector connectors. 42# Injector Specifications:
Which is the best fuel injector for nitrous Turbo?
The Hayabusa 60# injectors flow almost 3x more fuel (650cc/min) than standard 24.5 lb. stock Hayabusa injectors. They are ideal for dry nitrous and turbo applications where much more fuel is needed. We can flash your 2002 and up ECU with a base map for these injectors.
What causes no power to fuel injectors?
The most important signals that determine the accuracy of a signal coming out of ECU to injectors are crankshaft position sensor and camshaft position sensor, so to test a bad injector, you have to check the voltage on the injector when the ignition key is turned on: NO VOLTAGE? , so what causes no power to fuel injectors?