How to reset Toyota Highlander service maintenance indicator?
2008-2013 Highlander Maintenance Required Soon Reset STEP 1. Turn the Ignition ON. Don’t start the Engine. STEP 2. Press the ODO/TRIP BUTTON to display to TRIP A. STEP 3. Press and hold ODO/TRIP BUTTON and turn ignition to the “RUN” position. Hold knob for at least 5 seconds until “RESETTING MAINTENANCE DATA COMPLETED” is displayed. STEP 4
How to reset the service indicator message on a Mercedes?
A Mercedes-Benz dealer will reset the service indicator when they perform the service. If you perform the service yourself, you can manually reset the service indicator. Step 1 Turn the ignition switch using your key to the “II” position.
How do I reset to remove my service message?
On the older range of boilers this can be completed by holding the mode dial in the reset position for 3 seconds. For the new Logic+ and Vogue boilers this can be done by either pushing the reset button underneath the display, or going into the menu settings on the display.
How to reset service due interval 2008-2020?
Ensure ignition is off. Press in the wrench button on instrument cluster, and at the same time rotate the ignition key forward (without starting). While still pressing the “ WRENCH ” button in, press the “0,0” BUTTON and HOLD until the “SERVICE!” notification clears (about 2 – 3 seconds).
2008-2013 Highlander Maintenance Required Soon Reset STEP 1. Turn the Ignition ON. Don’t start the Engine. STEP 2. Press the ODO/TRIP BUTTON to display to TRIP A. STEP 3. Press and hold ODO/TRIP BUTTON and turn ignition to the “RUN” position. Hold knob for at least 5 seconds until “RESETTING MAINTENANCE DATA COMPLETED” is displayed. STEP 4
How do you reset the service indicator on a Mercedes?
Press the scroll forward button until “Conf. Full Serv.” is highlighted. Confirm the selection, and reset the service indicator by pressing the “OK” button. Once the service indicator is reset, place the ignition back to position “0.” Figure 6.
How do you reset the service indicator on a Honda Accord?
Scroll to “Full Service.” Press the scroll forward button until “Conf. Full Serv.” is highlighted. Confirm the selection, and reset the service indicator by pressing the “OK” button. Once the service indicator is reset, place the ignition back to position “0.” Figure 6. Confirm full service and reset the indicator.
How to avoid reset the perform service message?
To avoid this, cancel and sign in to YouTube on your computer. Hey guys! Welcome to our channel and thanks for stopping by. We are expanding and producing new content. Soon you’ll be able to see videos about our experiences in RVing, Campgrounds, my project 1st Gen Cummins, outdoor life, reviews and more.
How to reset the perform service indicator system?
To reset the “Perform Service” indicator system (after performing the scheduled maintenance) refer to the following procedure: 1. Turn the ignition switch to the ON position (Do not start engine). 2. Press and release the brake pedal two times. 3. Fully depress the accelerator pedal slowly two times within 10 seconds.
How do I Reset my maintenance required light?
Press and hold the reset button until you see the oil life indicator (this says “oil life” and has a percentage). Resetting changes the percentage to 100. Let go of the button and press it again, holding it for 10 seconds. The oil life indicator and maintenance requirement light blinks. Let go of the button one more time and hold for five seconds.
How do you reset the oil life indicator?
Don’t put your foot on the brake, turn the ignition switch to ON, or for push start, push the button once. Press and hold the reset button until you see the oil life indicator (this says “oil life” and has a percentage). Resetting changes the percentage to 100. Let go of the button and press it again, holding it for 10 seconds.