How to reset the tire pressure light on a Jeep Wrangler?
In this video I explain how to reset the tire pressure indicator light (TPMS) on a Jeep Wrangler. Step 1. Inflate all 5 tires (including the spare) to the recommended factory psi levels that are posted on the “Tire and Loading Information” sticker inside the driver’s side door opening. In this case it is 35 psi for all 5 tires. Step 2.
Why is tire pressure warning light not working on Jeep Patriot?
In addition, if the tire pressure warning light stays illuminated past a week, you will need to have your vehicle serviced as there could possibly be a sensor issue or a tire puncture. **NOTE: If you are unable to Reset the Tire Pressure Warning Light in the Jeep Patriot on the first try, REPEAT the step.
How can I reset the tire pressure sensor?
Another easy way to reset your car’s tire pressure sensor light is to simply drive your car at a designated speed and distance so that the computer can recognize the sensor. Just start your car and drive at a speed of 50MPH until you reach at least 10 miles of distance. It’s best to use cruise control so that you can maintain the speed.
Where to find tire pressure on Jeep Cherokee?
The EVIC even indicates which tire has low pressure. You can locate the manufacturer’s recommended tire pressure on the inside of the driver’s door. Keep in mind, tire pressure does, in fact, change in different weather conditions, therefore, you should ask your mechanic or dealer about the levels for dissimilar temperatures.
How to reset tire pressure system in Jeep Cherokee?
Drive above 15mph/24km for 20 minutes within the city to reset your system. Switch the ignition to the ON position without starting the vehicle. Press gas all the way to the floor 3x’s within 10 secs. Switch OFF ignition. After 10 secs start the engine. Switch the ignition to the ON position without starting the vehicle.
Can you reset the tire pressure warning light on a Jeep Patriot?
**NOTE: If you are unable to Reset the Tire Pressure Warning Light in the Jeep Patriot on the first try, REPEAT the step. If you are still unsuccessful, contact the dealership for assistance or consult your vehicle user’s manual. This site uses Akismet to reduce spam.
Where is the tire pressure light on a Jeep Wrangler?
Inflate all 5 tires (including the spare) to the recommended factory psi levels that are posted on the “Tire and Loading Information” sticker inside the driver’s side door opening. In this case it is 35 psi for all 5 tires. Step 2. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) before the light will turn off. Step 3.
What does the TPMs do on a Jeep Cherokee?
Jeep Cherokee’s are equipped with a TPMS (Tire Pressure Monitoring System) to assist you in maintaining the correct tire pressure. The warning low-pressure indicator light which appears within your dashboard or via the EVIC, indicated by a chime, should turn off automatically after your tires receive the proper amount of air pressure/ PSI.