How to reset oil life remaining percentage light?
You can reset the “Oil Life Remaining” percentage light on your 2014 to 2019 Chevy Silverado using these steps. Turn the ignition to the first position. Do not start the engine. Press the accelerator pedal slowly all the way down 3 times within a 5 second interval. Turn the ignition off.
When do you reset the oil life monitor?
Oil Life Monitor Reset Procedure. When you get your oil changed your oil life monitor must be manually reset. If the oil life monitor is not reset when your oil is changed the system has no way of tracking the oil life and will turn on the change oil warning prematurely.
What happens if the oil change light is not reset?
If the oil life monitor is not reset when your oil is changed the system has no way of tracking the oil life and will turn on the change oil warning prematurely. There are so many systems and reset procedures that it is very hard for Service Technicians to keep track of them.
How to reset the service reminder light after an oil change?
1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to res… This video shows how to reset the service reminder light after an oil change on model year 2002-2004 Audi A4/A6 models.
How do I reset oil sensor after an oil change?
Hold the button down until the “Oil” icon or word starts to flash, or the indicator lights show some other sign of resetting. Some cars will flash the word “Reset,” or display the numeral “100” to show that 100 percent of oil life remains after the oil change.
How to reset the oil light after an oil change?
How to reset change oil light? Locate your vehicle’s oil change reset button. Within your vehicle’s dashboard and around the gauge, locate a switch, button, or stick with a “reset” name. Change the odometer’s display mode to show total mileage. Press and hold the reset button, followed by turning the key. Confirm that you’ve reset the change oil light successfully.
How can I Reset my low oil light?
- Insert key into the ignition and turn the vehicle to the “ON” position. Do this without starting the vehicle.
- which means the system is resetting.
- Turn off the ignition once the light stops flashing.
How to reset the oil change reminder?
- Turn Ignition ON. Don’t start the car engine.
- then press Left Arrow to display remaining Oil Life.
- While the remaining OIL LIFE is displayed . Press and Hold the OK Button to reset the Oil Life to 100%.
- Turg Ignition off. Oil Service Light Reset is complete.