How to replace rear brake pads-electronic park brake?
Here is a simple guide to replacing the rear pads on my >07 Volvo with electric parking brake. This is based on solely my own experience having just done it but I take no responsibility for the contents! I used an Autel MaxiEST EST201 with V1.08 software for the release and reactivation of the Electric Parking Brake.
When to change front brake pads and discs?
As always, a common sense approach should always be taken. It is recommended that FAQ#50 (replacing the front brake pads and discs) is read first. It goes into details about how brakes work, and the process of changing the pads alone is almost identical, save for the rear brakes having a handbrake cable.
How to replace rear brake pads with est201?
When you first go into service mode it stores an error code which gets cleared at this stage if everything is in order. Assuming there are no error messages all you have to do is put the wheels back on and jack it back down again and remove the EST201 from the port and the job is done. Hope this helps someone.
How to change the rear brake pads on a Landrover?
This shows how to change the rear brake pads on cars fitted with the EPB, electronic parking brake. It’s on a Landrover Discovery Sport but is the same method on lots of cars with EPB like VW, Audi etc. No parts specified. Insert wisdom here. Almost done! Just follow the video for how to change the rear pads on cars fitted with EPB.
What happens if you don’t reset EPB after rear brake change?
The independent that changed the rear brakes on my 2.7 said that if you don’t reset the epb afterwards, then this can lead to premature wear of the new pads. True or not I don’t know, just passing it on.
Why do rear brake pads and discs need to be replaced?
In part because I’ve got an odd squeak, which very much sounds as though it’s coming from a rear brake: most noticeable travelling at low speed with the window open; and also because I think the discs look as though they should be replaced in any event. I changed the front pads & discs with no problem.
How do you change the pads on a F Pace?
Pump the brakes in and hold 5 times. Keep them engaged then pull up on the parking brake to engage it. That will calibrate it. Then down to release it. Just wanted to let anyone know that wants to change out the rear pads on their F Pace. I successfully changed my rear pads Sunday morning.
How do you reset the EPB on a Jaguar?
This indicates that the parking brake is in calibration mode. 5. Lightly press the footbrake pedal. 6. Apply the parking brake by using the EPB switch. 7. Release the parking brake. 8. Release the footbrake.