How to replace front door window regulator clips?
98-05 MK4 GOLF / BORA – REPLACING THE FRONT DOOR WINDOW REGULATOR CLIPS REPLACING THE FRONT DOOR WINDOW REGULATOR CLIPS
How do you remove window clips from a VW?
Try to raise the window so that the clips can be seen through the access holes described in step 8. If this is possible, remove the 10mm bolts, as described in step 10 and slide the clips off. Once the clips are off, remove the window from the door by pulling it up and out of the door.
What’s the best way to replace driver side air bags?
Let the car sit for about 15 minutes to fully drain the capacitors. Step 2: Locate the screw holes on the back of the steering wheel. You may have to remove some of the plastic panels on the steering column to access all of the screws.
98-05 MK4 GOLF / BORA – REPLACING THE FRONT DOOR WINDOW REGULATOR CLIPS REPLACING THE FRONT DOOR WINDOW REGULATOR CLIPS
Try to raise the window so that the clips can be seen through the access holes described in step 8. If this is possible, remove the 10mm bolts, as described in step 10 and slide the clips off. Once the clips are off, remove the window from the door by pulling it up and out of the door.
What kind of CV joint does front wheel drive car have?
Typical CV axle (shaft) of a front wheel drive car with a Rzeppa outer CV joint and closed tripod-style inner joint. The inner CV joint can work under small angle too. The design of outer CV-joint allows it to transfer the rotation motion at greater angles.
What happens when a CV axle is worn out?
A CV axle that is excessively worn can produce a clunking or clicking noise when shifting between decelerating and accelerating. CV axles in some FWD, AWD and 4WD vehicles. If an inner joint is worn out or sticking, it can cause the vehicle to shake laterally (side to side) on acceleration.