How to replace an evaporator in a GMC Yukon XL?
GMC YUKON XL REPLACE AIR-CON EVAPORATOR – YouTube GMC YUKON XL DASHBOARD REMOVAL TO REPLACE EVAPORATORThis video shows my procedure of removing dashboard and replacing evaporator A/C, some technicians do the…
How do you replace the evaporator core on a Chevy truck?
Steps Step 1: Remove the battery cable from the battery terminal. Step 2: Completely drain out the coolant liquid inside the pan by opening the release valve. Step 3: Extract the mounting bolts from the modular duct. Step 4: Now, remove the heater hoses. Step 5: Haul out the heater core mounting bolts using a socket wrench.
How do you replace an evaporator in an air conditioner?
Use a socket wrench to remove the mounting bolts attached to the A/C module, and remove it from the lower dash. Slide the evaporator away from the lower housing and replace it with the new one. Place the A/C module back into the bottom of the dash and reattach it with the mounting bolts.
How long does it take to replace an evaporator coil?
If your evaporator core stops working correctly your air conditioning will not function, and you would have to remove the evaporator coil and replace it with a new one. If you have basic auto repair knowledge, you can do the job yourself, which should take about two hours to complete.
GMC YUKON XL REPLACE AIR-CON EVAPORATOR – YouTube GMC YUKON XL DASHBOARD REMOVAL TO REPLACE EVAPORATORThis video shows my procedure of removing dashboard and replacing evaporator A/C, some technicians do the…
How do you replace a Chevy evaporator heater core?
I was able to remove the glove box, then remove the bottom pan from under the Heater Core. After bypassing the heater core under the hood the heater core slips right out. HINT: all the little bolts holding that pan use a 5.5mm or 7/32; EXCEPT the bolt way in the back that is virtually impossible to get to, which is a 9/32.
Where is the core on a 95 Chevy evaporator?
First, 95 Chevy C1500 5.7. After removing tons of stuff, I found that at least so far I removed too much. I was able to remove the glove box, then remove the bottom pan from under the Heater Core. After bypassing the heater core under the hood the heater core slips right out.
How to replace the evaporator in a Chevy Tahoe?
Remove the kick panel near the passenger side door and unplug the huge wiring harness underneath. Unplug the 4 connectors up a little higher as well. In the engine compartment, remove the heater core hoses and 13mm A/C evap hoses.
How to replace the evaporator on a Chevy Silverado?
Here is a quick writeup someone made for a 2000 Silverado. It is slightly different, but for the most part the same. Here it is just to give you an idea. “Have the A/C discharged. Properly disable the airbags/theftlock for your safety. Remove the main bezel surround, it just snaps out.
Where are the bolts on a Cadillac Escalade evaporator?
Now, remove the 7 nuts/bolts in the engine compartment that are holding the AC/heater assembly in place. They start behind the intake manifold and go almost to the fender. The bolts have a black piece of rubber behind them, and the nuts have a green piece of rubber behind them. 2 are behind the drier/accumulator thing.
Where did the GMC Yukon XL line come from?
The garage had them on and AC working in two days. The 2005 GMC Yukon XL Denali came from the NJ area and all the lines under the vehicle are ate up. Without raising the body off the frame to replace the original line, this is a simple and permanent fix and had me going in short time. Excellent quality, fit perfectly.
How much does GMC Yukon XL Denali cost?
The 2005 GMC Yukon XL Denali came from the NJ area and all the lines under the vehicle are ate up. Without raising the body off the frame to replace the original line, this is a simple and permanent fix and had me going in short time. Excellent quality, fit perfectly. Nice option compared to the $1700 OEM price for hardlines