How to Remove mini airbox?
Loosen and remove the two 10mm bolts holding the airbox to the chassis (green arrows). Press the air duct (green arrow) running from the front of the car forward while you pull the airbox up and out of the car. It’s a bit tricky, but it can be done with the air duct in place.
How to Remove r53 airbox?
You can now remove the lower airbox half by pulling back and then out. why you had to pull toward the front of the car before you pulled up and out.
Is there a quick way to replace struts?
They get worn out with use and sometimes will break if you’ve gone over some particularly bumpy terrain, resulting in a kind of deep click sound when you turn. Purchasing a quick-strut assembly is the quickest and easiest way to replace the struts yourself. Below, you can learn to remove the old strut and replace a new assembly.
Where are the front struts on a car?
The front struts on your car, truck, and SUV are mounted to the front-end of your vehicle. They assist in the operation of steering, braking, and accelerating.
What happens if you remove the center nut on a strut?
Do not remove the center nut or the strut will come apart and it is under high spring tension. Since you’ve removed the bolts from the steering knuckle, the strut might fall loose after you remove these bolts. It might help to have a partner holding onto the strut assembly while you loosen these bolts.
Do you need a compressor to change struts?
It’s recommended that the beginner forego attempts to compress the spring on the old strut using a spring compressor or spring clamps. This method is used to save money by salvaging the old spring and installing it on the new strut, but if you don’t have your own strut compressor, it will run you $700.
How do you remove the air box on a Yamaha?
Remove the seat. Remove the side fairings. Remove those ugly decorative plastics that hide the frame and shock. Cut of the air box ‘fins’ protruding from the front with a small saw. Disconnect the air box flanges from the throttle bodies. With a knife, cut off the flanges as close to the air box as possible.
They get worn out with use and sometimes will break if you’ve gone over some particularly bumpy terrain, resulting in a kind of deep click sound when you turn. Purchasing a quick-strut assembly is the quickest and easiest way to replace the struts yourself. Below, you can learn to remove the old strut and replace a new assembly.
How can I access the rear struts through the trunk?
Most of the time the upper mount of the rear struts can be accessed through the trunk and in other cases the rear seat needs to be removed to access it. Step 3: Loosen the lug nuts.
Do not remove the center nut or the strut will come apart and it is under high spring tension. Since you’ve removed the bolts from the steering knuckle, the strut might fall loose after you remove these bolts. It might help to have a partner holding onto the strut assembly while you loosen these bolts.