How to install a stereo in a Hyundai Elantra?
Hyundai Elantra GL / GLS / L / Limited 2012, Single/Double DIN Black Stereo Dash Kit by Metra®. Used to install a universal single or double DIN stereo which is approximately 2″ or 4″ high. When you need to install a double-DIN radio or… Hyundai Elantra 2012, Single/Double DIN Stereo Dash Kit by Best Kits®. With Pocket.
What kind of adaptor do I need for Hyundai Elantra?
Hyundai Elantra 2012, Retains OE USB Adaptor with RCA by Scosche®. It allows you to retain factory ports for use with aftermarket stereos. With an easy plug and play installation, no splicing of wires is required. Hyundai Elantra 2012, Speaker Adapters by Scosche®.
Where are the hazard lights on a Hyundai Elantra?
Shown in the photo below. You can see the wire harness connecting to the back of the hazard lights here. Next remove the two wiring harnesses that connect to the clock (black wires) and passenger airbag sign (yellow wires) above the radio.
What was the original name of the Hyundai Elantra?
Hyundai Elantra. The Elantra was initially marketed as the Lantra in Australia and some European markets. In Australia, this was due to the similarly named Mitsubishi Magna Elante model. This gave rise to disagreement with other motor manufacturers, and the name was standardized as “Elantra” worldwide in 2001 (except in Korea).
How to install a car radio in a Hyundai Elantra?
Next remove the two wiring harnesses that connect to the clock (black wires) and passenger airbag sign (yellow wires) above the radio. This picture looks up from the bottom of the radio with the fascia loosened. Notice the two wire harnesses above the radio. Step 3). Remove the Stock Radio Unscrew the four screws which surround the unit.
Shown in the photo below. You can see the wire harness connecting to the back of the hazard lights here. Next remove the two wiring harnesses that connect to the clock (black wires) and passenger airbag sign (yellow wires) above the radio.
How do you install a new car stereo?
Connect the wiring harness adapter from metra into the stock wire harness. Then screw in your mounting bracket from metra using the four screw which previously held the old radio in place.