How to diag a Harley Davidson Dyna Glide?
Press and hold the odometer reset button. Turn the key to “on” and the speedometer will then twist full range, while the rest of the dash lights up. Once the word “diag” shows up, your are in the diagnostic menu.
Why does the speedo on a Harley Davidson stop working?
The magnetic speed sensor pick up gets fouled from the metal shavings in the transmission which causes the speedo to stop working and the directionals to stop self canceling because of no input to the ECM from the sensor. The ECM thinks that the bike is standing still because of no input.
How to get the menu on a Dyna Glide?
Accessing the menu requires inputting a special code using the following buttons and switches. Turn the key ignition to OFF, and Run/Stop switch is to Run. Press and hold the odometer reset button. Turn the key to “on” and the speedometer will then twist full range, while the rest of the dash lights up.
What’s the red warning Lite above the odometer on a Dyna Wide Glide?
2001 dyna wide glide need to know what the red warning lite above the odometer on the left is all about. just bought the bike and service/owners manuals are on back order. HELLLLPPP! please. im losing some ofr the best puttin weather in months!
Is the speedometer on my Harley dynawide glide working?
The speedometer does not work properly but the odometer and self canceling turn signals … read more Vocational, Technical or Tra… Vocational, Technical or Tra… Vocational, Technical or Tra… I have aglide. When I shifted into 2nd gear the check engine
How do you reset the turn signal on a Dyna Glide?
Press left turn signal switch once, and light will flash a number of times to indicate an error code. There is 1.5 seconds between flashes to indicate 1st and 2nd digit of codes and four second pause between codes. Press and hold left switch down for five seconds, and light will flash twice to indicate the TSSM is reset. Turn ignition to off.
The magnetic speed sensor pick up gets fouled from the metal shavings in the transmission which causes the speedo to stop working and the directionals to stop self canceling because of no input to the ECM from the sensor. The ECM thinks that the bike is standing still because of no input.
What happens if your speedometer and odometer are not working?
If your speedometer (and odometer) is not working, your turn signals are not going to autocancel. No indication to the module that you have gone anywhere. Find and fix the speedo problem (cable or drive unit) and your turns will work fine. Same thing happened to my 93 Heritage.
What kind of speedometer does a Harley Davidson use?
Electronic Mini Speedometer Gauge by HardDrive®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver…
Where to find DTC module on Harley Davidson Dyna Glide?
Until the codes are clear, the light will not turn off. Earlier Dyna models may differ in terms of accessing the DTC module. The diagnostics menu is all accessed and read from the digital odometer.
Do you need a tachometer on a Dyna Super Glide?
This kit is designed for installation on 1995 – 2003 FXD Dyna Super Glide motorcycles equipped with an electronic speedometer and no tachometer. NOTE USE THE APPROPRIATE SERVICE MANUAL PROCEDURE! Service Manuals are available from your Harley-Davidson dealer. If the procedure is not within your capabilities or you do not have the
Is there a 2006 Dyna Wide Glide for sale?
2006 Harley-Davidson Dyna Wide Glide FXDWG , , Used 2006 Harley-Davidson FXDWGI Dyna Wide Glide Fuel Injected Featuring So Much Custom We Can Hardly L… 2006 Harley-Davidson® FXDWGI – Dyna® Wide Glide®, COME CHECK THE LARGEST SELECTION OF USED HARLEY’S IN FLORIDA.
What kind of fuel does a Dyna Wide Glide use?
2006 Harley-Davidson Dyna Wide Glide FXDWG FXDWGI, Used 2006 Harley-Davidson FXDWGI Dyna Wide Glide Fuel Injected Featuring So Much Custom We Can Hard… 2006 Harley-Davidson® FXDWGI – Dyna® Wide Glide®, FRESH SERVICE, READY TO RIDE! 2006 Harley-Davidson® Dyna® Wide Glide® One look at the Wide Gl…
What’s the best way to install a Dyna Glide?
Figure 1. Remove the primary drain plug and check the plug for excessive debris. The shifter or shift lever and the foot peg or foot rest will come off next. After you have removed the foot peg, you will want to fill the mounting holes with epoxy, or just short bolts to avoid rust starting in them. Figure 2.
What makes a Harley Davidson fxdwgi Dyna Wide?
Its kicked out, wide-set front fork legs and near-ape-hanger handlebar took it about as close to a real chopper as a factory-built motorcycle dares go. But even bad-ass choppers must eventually heed the march of progress, and for 2006, the FXDWG joined the rest of Harley’s Dyna family in series of major upgrades.