How to change the transmission on a Jeep Wrangler?
Using your cut down H17 allen bit or modified coupling nut and 17mm or 11/16″ wrench, reinstall the drain bolt onto your NSG 370 manual transmission. 7. Attach a bottle pump to your Mopar transmission fluid bottle, insert the feeder tube into the side of your NSG 370 manual transmission and then begin pumping the fluid into it.
When to change transmission fluid on JK Wrangler?
Changing your Jeep JK Wrangler’s transmission fluid will give you an opportunity to inspect the magnetic drain bolt for any signs of abnormal wear going on inside (i.e. large chunks of metal attached to it) and new fluid will help keep things operating smoothly.
How many gears does a Jeep Wrangler have?
These transmissions feature four forward gears including one overdrive gear. With an aluminum housing, the NV1550 was a short-lived 5-speed manual transmission for Jeep Wranglers. This is a light duty trans fitted with 5 forward gears including 1 overdrive gear.
How often should I service my Jeep NSG 370?
Jeep JK Wrangler NSG-370. Manual Transmission Service. As a part of good routine maintenance, it is highly recommended that you service your NSG 370 manual transmission once every 30,000 miles.
Using your cut down H17 allen bit or modified coupling nut and 17mm or 11/16″ wrench, reinstall the drain bolt onto your NSG 370 manual transmission. 7. Attach a bottle pump to your Mopar transmission fluid bottle, insert the feeder tube into the side of your NSG 370 manual transmission and then begin pumping the fluid into it.
Which is better automatic or manual on a Jeep Wrangler?
If your Wrangler transmission happens to blow on the trail, a manual transmission is an easier fix than an automatic. When it comes down to the nitty-gritty, choosing your transmission is all about personal preference. Some people will always stick with a manual transmission, while others simply prefer an automatic.
These transmissions feature four forward gears including one overdrive gear. With an aluminum housing, the NV1550 was a short-lived 5-speed manual transmission for Jeep Wranglers. This is a light duty trans fitted with 5 forward gears including 1 overdrive gear.
Changing your Jeep JK Wrangler’s transmission fluid will give you an opportunity to inspect the magnetic drain bolt for any signs of abnormal wear going on inside (i.e. large chunks of metal attached to it) and new fluid will help keep things operating smoothly.
Where is the drain plug on a Jeep JK Wrangler?
NOTE: You can also create a drain plug removal tool by cutting the end off of a 17mm allen wrench or H17 bit. 1. Park your Jeep JK Wrangler on level ground. Place an oil catch pan underneath your NSG 370 manual transmission and then, using an H14 allen bit, remove the fill bolt which is located on the passenger side as shown. 2.
Where to get new transmission fluid for a Jeep Wrangler?
New transmission fluid is available at any auto parts store. If your transmission is extremely low on fluid or completely out, it needs to be serviced immediately. A transmission service technician will drain and replace the transmission fluid.
Where is the oil catch pan on a Jeep JK Wrangler?
Park your Jeep JK Wrangler on level ground. Place an oil catch pan underneath your NSG 370 manual transmission and then, using an H14 allen bit, remove the fill bolt which is located on the passenger side as shown. 2.
New transmission fluid is available at any auto parts store. If your transmission is extremely low on fluid or completely out, it needs to be serviced immediately. A transmission service technician will drain and replace the transmission fluid.
What kind of transmission does a Jeep Wrangler have?
Jeep Wrangler manual transmissions are durable. However, checking the transmission fluid in your Jeep Wrangler is an essential part of proper maintenance. If you let the transmission fluid in your vehicle get too low, it can cause major damage and could potentially result in a ruined transmission.
What does it mean when fluid comes out of a Jeep Wrangler?
Choose the open-end box wrench that fits that bolt and take the bolt out. After you remove the bolt, fluid may come out of the hole where the bolt was located. This, of course, indicates that the fluid is full.