How to change the oil on a 2009 Hyundai Santa Fe?
In this video, I run through the process of changing the oil on a Hyundai Santa Fe. The procedure is similar on all late model Hyundai V6 engines with a cartridge style oil filter. I accept no responsibility for mishaps that may have occurred from following these processes. Loading…
Why is there no oil in my Santa Fe?
There is a tube in your Santa Fe that takes the oil from the pan to the oil pump. This is called the pickup tube. This tube can fall out, which will cause no oil to get to the oil pump. Modern engines use a bypass valves to keep oil flowing to the engine even when the filter is clogged.
How often do you change the oil on a Hyundai Elantra?
According to Hyundai, 2010 and newer models (Hyundai Elantra, Sonata, Santa Fe, Accent) have a recommended oil change interval of 7,500 miles. Pre-2010 Hyundai models require oil changes every 3,000 to 5,000 miles. Every Hyundai engine is different, so it is better to look it up on your owner’s manual.
What causes a Hyundai Santa Fe to lock up?
One of the most serious issues that can happen to your Hyundai Santa Fe ‘s engine is if ends up with low oil pressure. Low oil pressure will cause the engine to seize up. When the oil pressure light on, it should be assumed that the engine locking up is imminent.
In this video, I run through the process of changing the oil on a Hyundai Santa Fe. The procedure is similar on all late model Hyundai V6 engines with a cartridge style oil filter. I accept no responsibility for mishaps that may have occurred from following these processes. Loading…
Where to get a Hyundai Santa Fe oil filter?
You can get the 26320-3C100 Hyundai oil filter from the dealer. It includes two rubber O-rings you should replace when you replace the filter. My dealer is very expensive for the filter ($13), so I recently ordered 5 online for Savage Hyunai in Pennsylvania. ( http://tinyurl.com/8l64z7 ).
Do you have to change the oil in a Hyundai?
IF you can’t or don’t want to change the oil yourself, I would take it to a Hyundai dealer and have it done rather than one of the oil change places. The reason is that I think you want to have a Hyundai filter put in it rather than some other brand.
What kind of oil does a Hyundai Fiter take?
It does not leak, but I did order them when I ordered the fiters for future use. Hyundai recommends 5w-20 oil and that is what I used, but I think in the manual it shows 5w-30 as okay also. The only bad thing is it takes 5 1/2 quarts, so you will have half a quart left over until you change it a second time.
How do you change transmission fluid in a Hyundai Santa Fe?
1. The first step is to get your Hyundai Santa Fe raised to give you access to the undercarriage. Make sure that the car is level. Loosen the mounting bolts on the engine cover on the undercarriage to take it off. 2. Use a 24mm socket wrench to detach the drain bolt and then drain the old transmission fluid into a catch pan.
You can get the 26320-3C100 Hyundai oil filter from the dealer. It includes two rubber O-rings you should replace when you replace the filter. My dealer is very expensive for the filter ($13), so I recently ordered 5 online for Savage Hyunai in Pennsylvania. ( http://tinyurl.com/8l64z7 ).
How to change the oil on a Hyundai Elantra?
In this guide, you will find instructions on how to change the engine oil on Hyundai vehicles with a four-cylinder engine such as Santa Fe, Sonata, Accent, Elantra, Veloster, etc. The video clips and pictures in this guide are from a 2015 Hyundai Elantra. Follow these steps to change the engine oil on your Hyundai. Drive the car up on-ramps.
When to change the gasket on a Hyundai Santa Fe?
Although changing the gasket in Hyundai Santa Fe’s after 2000 is more complicated, dealing with a Santa Fe from 2000 and earlier is fairly straightforward. Park your Hyundai Santa Fe on a level surface and put the gears in park.