How to change the front wheel hub on a Nissan Altima?
1. Cotter pin 2. Disc rotor 3. Wheel hub and bearing assembly 4. Splash guard 5. Steering knuckle 1. Remove wheel and tire from vehicle. Refer to WT-66, “Adjustment”. 2. Remove brake caliper using power tool, leaving brake caliper hydraulic lines connected.
How do you remove a wheel hub assembly?
Then start disassembling the brakes by removing the caliper bolts and the bracket bolts. Next, remove the rotor. If the vehicle has anti-lock brakes, disconnect any wiring harness plugs. Loosen all the bolts that hold the wheel hub assembly onto the knuckle. Once that is done, you should be able to remove the wheel hub assembly as a unit.
How to remove the front wheel hub on a Nissan Sentra?
Remove the brake caliper torque member bolts, leaving the brake hose attached. Position the brake caliper aside with wire. Refer to BR-41, “BRAKE CALIPER ASSEMBLY : Removal and Installation”. Do not depress the brake pedal while the brake caliper is removed. Put alignment marks (A) on the disc brake rotor and on the wheel hub and bearing.
How do you remove a wheel lock nut?
Remove the wheel hub lock nut. Remove the bolts and the wheel hub and bearing from the steering knuckle. Remove the splash guard from the steering knuckle. Suspend the drive shaft with suitable wire. If necessary, remove the wheel studs (1) from the wheel hub and bearing using a suitable tool (A).
1. Cotter pin 2. Disc rotor 3. Wheel hub and bearing assembly 4. Splash guard 5. Steering knuckle 1. Remove wheel and tire from vehicle. Refer to WT-66, “Adjustment”. 2. Remove brake caliper using power tool, leaving brake caliper hydraulic lines connected.
How to remove wheel sensor from Nissan Altima?
Remove wheel sensor from steering knuckle. Refer to BRC-63, “Removal and Installation” (ABS), BRC-134, “Removal and Installation” (TCS/ABS), BRC-236, “Removal and Installation” (VDC/TCS/ABS). CAUTION: Do not pull on wheel sensor harness. 5. Remove cotter pin, then remove lock nut from drive shaft using power tool. 6.
What’s the service manual for a Nissan Altima?
Nissan Altima 2007-2012 Service Manual: Front wheel hub and knuckle Nissan Altima 2007-2012 Service Manual/ Front Axle/ On-vehicle repair/ Front wheel hub and knuckle Removal and Installation 1. Cotter pin 2. Disc rotor 3. Wheel hub and bearing assembly 4. Splash guard 5. Steering knuckle REMOVAL 1. Remove wheel and tire from vehicle.
How to remove Rusted Wheel hub bearing assembly the easy way?
How to remove a rusted wheel hub bearing assembly the easy way. – YouTube How to remove a rusted wheel hub bearing assembly the easy way. If playback doesn’t begin shortly, try restarting your device.
How much torque does a hub bearing have?
Hub Bearing Torque Specification Guide 2010 Make year Model Front torque ft-lbs/Nm Rear torque ft-lbs/Nm
Nissan Altima 2007-2012 Service Manual: Front wheel hub and knuckle Nissan Altima 2007-2012 Service Manual/ Front Axle/ On-vehicle repair/ Front wheel hub and knuckle Removal and Installation 1. Cotter pin 2. Disc rotor 3. Wheel hub and bearing assembly 4. Splash guard 5. Steering knuckle REMOVAL 1. Remove wheel and tire from vehicle.
Remove wheel sensor from steering knuckle. Refer to BRC-63, “Removal and Installation” (ABS), BRC-134, “Removal and Installation” (TCS/ABS), BRC-236, “Removal and Installation” (VDC/TCS/ABS). CAUTION: Do not pull on wheel sensor harness. 5. Remove cotter pin, then remove lock nut from drive shaft using power tool. 6.
Hub Bearing Torque Specification Guide 2010 Make year Model Front torque ft-lbs/Nm Rear torque ft-lbs/Nm