How to change and adjust a CB750 SOHC clutch?
Go ahead and break all four of them loose,then proceed to back them out 1/2 turn at a time until the lifter plate becomes slack. The plate will become completely slack before the bolts are all the way removed,so need to worry about anything flying out under tension. Remove the lifter plate and the clutch springs.
How to replace handle lock on Honda CB750?
Install the Switch On the bracket and positively connect the coupler. b. Replacement of handle lock Removc the handle lock Case mounting screw With a cross point screw driver and remove the lock case 2. Insert the key into the handle lock and turn counter clockwise approximately 600 and then the handle lock can be removed from the steering stem.
Why is my Honda Shadow 750 slipping in gear?
The friction created by the multiple plates contained in the clutch on a Honda Shadow 750 motorcycle transfers power from the motor to the transmission. If your motorcycle has been slipping in and out of gear or you have heard or felt grinding coming from the clutch plates, remove the clutch to inspect the plates and springs for damage or wear.
How do you remove retainer from clutch plate?
Locate the four retainer bolts at the corners of the clutch plate. Remove the bolts with a socket wrench. Remove the four retainer springs from underneath the bolts by pulling them straight out manually. Unbolt the pressure plate from underneath the springs. Remove the fiber and metal discs that are underneath the pressure plate.
Go ahead and break all four of them loose,then proceed to back them out 1/2 turn at a time until the lifter plate becomes slack. The plate will become completely slack before the bolts are all the way removed,so need to worry about anything flying out under tension. Remove the lifter plate and the clutch springs.
The friction created by the multiple plates contained in the clutch on a Honda Shadow 750 motorcycle transfers power from the motor to the transmission. If your motorcycle has been slipping in and out of gear or you have heard or felt grinding coming from the clutch plates, remove the clutch to inspect the plates and springs for damage or wear.
Locate the four retainer bolts at the corners of the clutch plate. Remove the bolts with a socket wrench. Remove the four retainer springs from underneath the bolts by pulling them straight out manually. Unbolt the pressure plate from underneath the springs. Remove the fiber and metal discs that are underneath the pressure plate.
Install the Switch On the bracket and positively connect the coupler. b. Replacement of handle lock Removc the handle lock Case mounting screw With a cross point screw driver and remove the lock case 2. Insert the key into the handle lock and turn counter clockwise approximately 600 and then the handle lock can be removed from the steering stem.
How much torque does a Honda Shadow 750 have?
Honda Shadow 750 Torque Values, Tools, & Other Data VT750C – Aero TORQUE VALUES Final drive oil filler cap / drain bolt 12 Nm (1.2kgf-m, 9lbf-ft) Front axle bolts 59 Nm (6.0kgf-m, 44lbf-ft) Front Fork axle pinch bolts 22 Nm (2.2kgf-m, 16lbf-ft) Fork center socket bolt 29 Nm (3.0kgf-m, 22lbf-ft)
What are the torque values on a Honda spirit?
Home of the Honda Shadow VT750DC Spirit and More! Click here for a quick view of commonly needed factory specified torque values for nuts, bolts, and connectors on a bundle of VT750 Shadow motorcycles including the chain driven ACE and DC Spirit, the shaft driven Aero, C2 Spirit, and Phantom, and the new chain driven Shadow RS as well.
How to adjust a cable operated clutch, Honda?
If you have a clutch with mechanical linkage and your clutch is starting to slip you might want to try adjusting it first. Here is a procedure for adjusting a cable operated clutch on a Honda. http://www.ericthecarguy.com/forum/de…
When did the Honda Shadow 750 come out?
This Honda Shadow 750 Service Manual covers 2001 – 2007 Honda VT750DC Shadow Spirit motorcycles. When you subscribe to the Honda Shadow 750 Service Manual you’ll get instant access to the following information:
Home of the Honda Shadow VT750DC Spirit and More! Click here for a quick view of commonly needed factory specified torque values for nuts, bolts, and connectors on a bundle of VT750 Shadow motorcycles including the chain driven ACE and DC Spirit, the shaft driven Aero, C2 Spirit, and Phantom, and the new chain driven Shadow RS as well.